Jump to content
Do Not Sell My Personal Information

Cat Nuts


bt_cav
 Share

Recommended Posts

Hey All,

Still got my engine management light shining at me due to my catalyic convertor not working properly, changed the front lambda sensor and had the codes cleared (light put out) but no change motorway driving (80 miles) at least 5 days a week but still it glows with contempt.

I have been thinking about unbolting the cat and seeing if there is any loose bits and emptying them out to see if would make any difference.

The reason the cat is nackered in the first place is the coil packed in causing a misfire before I rolled to a stop. It did pass the mot (had the light put out before the test)

What I'd like to know is dose the cat have nuts & bolts or is has it got captive bolts that could snap and cause me more bother than its worth? quite happy to snap through bolts and replace them if this is the case.

Focus 1.6, 04 (Mk1)

Thanks in advance all

Link to comment
Share on other sites


Hey All,

Still got my engine management light shining at me due to my catalyic convertor not working properly, changed the front lambda sensor and had the codes cleared (light put out) but no change motorway driving (80 miles) at least 5 days a week but still it glows with contempt.

I have been thinking about unbolting the cat and seeing if there is any loose bits and emptying them out to see if would make any difference.

The reason the cat is nackered in the first place is the coil packed in causing a misfire before I rolled to a stop. It did pass the mot (had the light put out before the test)

What I'd like to know is dose the cat have nuts & bolts or is has it got captive bolts that could snap and cause me more bother than its worth? quite happy to snap through bolts and replace them if this is the case.

Thanks in advance all

the fact it passsed the mot would suggest the cat is fine the emissions would have been too high with the cat not working and so would have failed if there were any loose bits you would hear them rattling with the car running you should get low idling loss of power at low anf high revs

Link to comment
Share on other sites

have you checked out the lambda after the cat? this is only really to check the cat is working and not for emissions so this could be your problem.

has the car been connected to diagnostics? knowing what the code is would be a great place to start

Link to comment
Share on other sites

  • 10 months later...

Hi Folks,

Just wanted to update this.

I got the error code Cant remember the exact code just now but it said the cat was not working or words to that effect will confirm soon.

However Since I replaced the fuel filter on (Tuesday 5th April) and covered a couple of hundred miles through the various speed ranges and been through a cat test, the engine management light has stayed off.

(I canceled the codes befoer I drove a couple of miles to MOT then replaced the filter after the MOT)

So it might be worth changing the fuel filter and maybe a drop of injector cleaner wouldnt hurt befoer splashing out on Lambda Sensors and a Catalyic Convertor If your having the same problem :)

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership