ive just got one of these

http://www2.fordconnection.com/fordconnection/multimedia/images/aud_focus_6000cd.jpg

and ive took out one of these

http://www2.fordconnection.com/fordconnection/multimedia/images/aud_focus_6000cd.jpg

now, the wiring harness's are totaly diffrent.

halfrauds and everywher eive looked do notr sell a ford to ford harness.

Ive got both harness's

the one from the new stereo, and the one from the old.

can any one advise me on wiring them up to each other?

new

http://img853.imageshack.us/i/photo5p.jpg/

old

http://img687.imageshack.us/i/photo1nz.jpg/

thanks for your help.

really cannot find any wiring diagrams anywhere :(

this may be of assistance

Part No: 86123 in the following page

http://www.justcarkits.co.uk/cgi-bin/sh000004.pl?REFPAGE=http%3a%2f%2fwww.justcarkits.co.uk%2facatalog%2fsearch.html&WD=iso%20ford%20quadlock&PN=Ford_Leads.html%23a86123#a86123

thanks for the reply but that doesn't look right, the pins on the opposite end to the quad lock are to short, they need to be 8 pins long and not four as appears in thie photo.

ive found some diagrams that label the connections if anyone can confirm these are correct then in theory i can wire it up directly

this is my current stereo connection

http://www.tehnomagazin.com/images/ford-3000-4000-connector.jpg

this is what i have on the new one.

http://www.tehnomagazin.com/images/ford-5000c.gif

so im right in thinking,

rr+ > rr+

rr- > rr-

etc etc

just link the 2 sides up?

im assuming this is right?

ive done a mock up, is this right?

http://img18.imageshack.us/i/screenshot20110331at220.png

incase any one else has this problem, i have wired it up as shown in my diagram and it works fine.