Wiring In A Tow Bar

[Portland Bill]

Guys I've got a second hand Whitter towbar that I took off another Mondeo.

Stupidly I didn't pay attention to the wires from which I disconnected the tow bar loom. I've identified all the wires of the loom to the pins in the socket, but I need to know which wires are which on the Ford loom going to the rear light cluster.

It just has a straight connector plug numbered 1 - 6/7.

Does anyone know?

Cheers

Kristian

[dezwez]

Guys I've got a second hand Whitter towbar that I took off another Mondeo.

Stupidly I didn't pay attention to the wires from which I disconnected the tow bar loom. I've identified all the wires of the loom to the pins in the socket, but I need to know which wires are which on the Ford loom going to the rear light cluster.

It just has a straight connector plug numbered 1 - 6/7.

Does anyone know?

Cheers

Kristian

try this link

LINK :)

Test wires with test meter

[Portland Bill]

Thanks for that. I was actually looking for the colours for the car's harness, but I found it after a good bit of rummaging around. Nevertheless, that'll help when I get around to wiring the S socket.

I just needed enough for a basic light board for now.

Thanks again.