February 5, 2010, 12:58 am
I need to remove my blower motor from the passanger side behind the glove box and replace it with a working motor, any Ideas on how to do this? A step by step guide would be greatly appreciated
February 5, 2010, 10:36 am
well i hope you dont mind sitting on your head as this is a tricky job!
first of all you will need to remove the glovebox and the lower footwell trim.
there should be a screw securing the vent hose to the motor, you will need to remove this.
unplug the motor and remove the 3 bolts securing it.
the motor should now be free to pull out. albeit very awkward!
February 5, 2010, 2:37 pm
Thanks very much stef123 ur reply is much appreciated, I'm glad that's all thats to it! Thot it was goin to be a complicated job. Well as standing on my head goes that will be a pain in the backside!!