Border4x4
March 19, 2011, 11:34 am
[size="5"]Hi, I have a ford F-250 7.3L in the workshop at the moment and just doing some tests and I think there is not enough fuel supply from the low pressure pump to the high pressure pump, I have put a gauge on there to check the pressure and it reads 50psi is this the correct reading? Thanks[/size]
mintalkin
March 19, 2011, 5:19 pm
Factory pressures are anywhere from 40 to 70psi so 50psi should be ok.
Border4x4
March 19, 2011, 5:34 pm
[quote name='mintalkin' timestamp='1300573190' post='119182']
Factory pressures are anywhere from 40 to 70psi so 50psi should be ok.
[/quote]
Cheers for that