Help - Search - Members - Calendar
Full Version: Wiring In A Tow Bar
Ford Owners Club - Ford Forums > Ford Models > Ford Mondeo Club
Portland Bill
Guys I've got a second hand Whitter towbar that I took off another Mondeo.

Stupidly I didn't pay attention to the wires from which I disconnected the tow bar loom. I've identified all the wires of the loom to the pins in the socket, but I need to know which wires are which on the Ford loom going to the rear light cluster.

It just has a straight connector plug numbered 1 - 6/7.

Does anyone know?

Cheers

Kristian
dezwez
[quote name='Portland Bill' timestamp='1304773785' post='126100']
Guys I've got a second hand Whitter towbar that I took off another Mondeo.

Stupidly I didn't pay attention to the wires from which I disconnected the tow bar loom. I've identified all the wires of the loom to the pins in the socket, but I need to know which wires are which on the Ford loom going to the rear light cluster.

It just has a straight connector plug numbered 1 - 6/7.

Does anyone know?

Cheers

Kristian
[/quote]
try this link
[url="http://www.box.net/shared/gzl7cgmqmm"]LINK[/url] :)

Test wires with test meter
Portland Bill
Thanks for that. I was actually looking for the colours for the car's harness, but I found it after a good bit of rummaging around. Nevertheless, that'll help when I get around to wiring the S socket.

I just needed enough for a basic light board for now.

Thanks again.


Full Colour Version: Wiring In A Tow Bar
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2014 Invision Power Services, Inc.