Help - Search - Members - Calendar
Full Version: Guide Fitting Second Reverse Light Ford Focus Mk2 & Mk2.5
Ford Owners Club - Ford Forums > Ford Models > Ford Focus Club > Ford Focus Guides
Pages: 1, 2, 3, 4
alkyz89
oh and just a quick one the glue i used sets hard almost instantly but recommended to wait an hour before heavy use, which saved me alot of time!!!
Stoney871
[IMG]http://i1130.photobucket.com/albums/m522/stoney871/Snapbucket/Car%20Photos/lightsbbb.jpg[/IMG]

Reversing light with Cree Q5

[IMG]http://i1130.photobucket.com/albums/m522/stoney871/Snapbucket/Car%20Photos/lightsaaa.jpg[/IMG]

Reversing light and Rear fog with Q5 (standard fog lens and white Q5, clear lens and red Q5 upgrade sometime soon)
alkyz89
i like the way no one noticed the fabric tape on my thumb 6th pic down hehe :ph34r:
Lenny
[quote name='alkyz89' timestamp='1327832424' post='163751']
i like the way no one noticed the fabric tape on my thumb 6th pic down hehe :ph34r:
[/quote]
spotted it mate, but i didnt think my comments on it would be welcome :lol:
what happened did you slip with the stanley blade?

i ended up in the docters when sealing around the led badge with a syringe full of silicone lmao the plunger broke so i began to use a screwdriver, but the plunger head split, and the screwdriver went out through the bottom of the syringe and in to my hand lol taking the silicone with it. 2 stitches later i was good as new lol
alkyz89
yea the good old stanley blade trick lol i was removing the old electrical tape from the reverse cables lol but found the fabric tape was alot more supple and agile alowing me to continue haha plus it was pretty stealth lol
ouch iv seen someone do a similar thing to you when i went fishing!!!
he decided to try and force a barbed needle through a hard bait as you can imagen he ended up sinking it into his index finger lol... he then goes hospital and the had to push it all the way through so they could cut off the barb, then pull it back the way it went in :unsure:
alkyz89
[img]http://i1123.photobucket.com/albums/l544/alkyz89/Car%20Pictures/DSC_0328.jpg[/img]
couldnt get a good enough picture to show the beam of light behind the car.... but im sure you get the idea lol B)
Lenny
[quote name='alkyz89' timestamp='1327876077' post='163891']
[img]http://i1123.photobucket.com/albums/l544/alkyz89/Car%20Pictures/DSC_0328.jpg[/img]
couldnt get a good enough picture to show the beam of light behind the car.... but im sure you get the idea lol B)
[/quote]

Nice picture mate,
a single cree Q5 reverse bulb throws out a 8-10 foot beam on its own so the two togeather would cover a 20ft radious on the rear of the car lol on each side. B) looks quality mate,
Stoney871
Very nice indeed.
And i thought mine was bright.
Bigdaddycain
So that's how you hatchback chaps have two reverse and two foglights! Clever! B)

My conversion was similar, except i had to run fresh cable (both sides) to the bumper area, as the estate version has no lights in the rear bumper.

I bought a left hand drive main rear light, plus a left hand drive reverse light to carry out my conversion.

So my fogs are roughly half way up the car, housed in the lower sections of the main rear light clusters, the reverse lights, in the same position as you chaps...

[IMG]http://i25.photobucket.com/albums/c97/joannelf/DSC00154-5.jpg[/IMG]

[IMG]http://i25.photobucket.com/albums/c97/joannelf/DSC01247-1-1-1-1.jpg[/IMG]
Lenny
The first post of this guide has finally been updated with a downloadable PDF
sorry guys thought i had uploaded the PDF for this one already.
Dave the Dude
Hi
Newbie here with a related question re this subject. I live in Thailand and the right hand fog light comes on when ' normal' rear lights are on. believe it or not this is factory standard here. As we have no fog or bad weather here, i would like to simply replace the red lense with a clear one so both are the same and the car will look symetrical from the rear. I will wire the new one to then come on a a second reverse light and maybe need to change the bulb, Dunno???

Top website BTW!!!
Lenny
[quote name='Dave the Dude' timestamp='1343372172' post='196869']
Hi
Newbie here with a related question re this subject. I live in Thailand and the right hand fog light comes on when ' normal' rear lights are on. believe it or not this is factory standard here. As we have no fog or bad weather here, i would like to simply replace the red lense with a clear one so both are the same and the car will look symetrical from the rear. I will wire the new one to then come on a a second reverse light and maybe need to change the bulb, Dunno???

Top website BTW!!!
[/quote]

Hi and welcome to the forum,
you will require a uk Near side reverse light lens unit,
and if the unit that side illuminates along with your reverse light already, then you wont need to wire anything just replace the unit
Haz93
Wish we had good enough weather to not need fogs!!!
Haha
I think he means that the fog comes on with the rear side lights / parking lights, not the reverse lights :S that's how I interpreted it but not sure mate
:)
Dave the Dude
[quote name='Haz93' timestamp='1343373329' post='196874']
Wish we had good enough weather to not need fogs!!!
Haha
I think he means that the fog comes on with the rear side lights / parking lights, not the reverse lights :S that's how I interpreted it but not sure mate
:)
[/quote]
Thats right Haz
The standard set up is bloody stupid.[b] BTW [/b]I am talking about right hand cars like back in Blighty.

The passanger side has clear reverse lense same as u lot, but on the drivers side it has an un-nessesary red fog light that is wired up to blind the drivers to the rear of you every night!!!!!
I think I will need a left hand drive reversing light unit as described in the guide? maybe Ebay or Cambodia!!!! LOL!
Lenny
[quote name='Haz93' timestamp='1343373329' post='196874']
Wish we had good enough weather to not need fogs!!!
Haha
I think he means that the fog comes on with the rear side lights / parking lights, not the reverse lights :S that's how I interpreted it but not sure mate
:)
[/quote]

ah yes lol
first post i read today and i was half asleep sorry,
yes he would need to run a link from the reverse side to the replacment fog,
but i would advise to put a 3 way switch on the line with both connection from the fog and the reverse to the one unit,
then if the car is ever being sold he could fit a red bulb and flick the switch to II instead of I

I = the reverse feed flowing to the bulb
O = Nothing flowing to the light unit
II = the fog light feed flowing to the bulb
the dark lord
Hi

Great guide for this project!

Not being one to fail to have a fiddle and alter things I have a quick question...

On my car i have just had a look, behind the o/s fog lamp unit there is a plug with a about 6-8 wires going into it but just a dummy connector in it...

Is this for trailor electrics? and could i take my feed for my new reverse lamp from this?


The reason i ask is I will shortly be fitting a towbar and it would save faffing around splicing and scotchlocking (shudder) if i could just go into the back of either the towing socket or the plug that plugs into the socket on the car...
Brigante
For anyone thinking of doing this to a mk2 I found this on ebay. Save you 10-15quid. Just ordered one myself so hopefully I'll know if its any good soon.

http://www.ebay.co.uk/itm/280789369908?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Brigante
Mk2.5 version

http://www.ebay.co.uk/itm/FORD-FOCUS-MK2-3-EURO-STYLE-LEFT-HAND-DRIVE-CLEAR-REAR-BUMPER-FOG-LIGHT-ST2-3-RS-/270959742090?_trksid=m444&_trkparms=algo%3DCRX%26its%3DI%252BC%252BS%26itu%3DSI%252BUA%252BLM%252BLA%26otn%3D4%26ps%3D63%26clkid%3D1534001585581861744&_qi=RTM1053524
.Ryan
[quote name='Brigante' timestamp='1345744466' post='202906']
Mk2.5 version

[url="http://www.ebay.co.uk/itm/FORD-FOCUS-MK2-3-EURO-STYLE-LEFT-HAND-DRIVE-CLEAR-REAR-BUMPER-FOG-LIGHT-ST2-3-RS-/270959742090?_trksid=m444&_trkparms=algo%3DCRX%26its%3DI%252BC%252BS%26itu%3DSI%252BUA%252BLM%252BLA%26otn%3D4%26ps%3D63%26clkid%3D1534001585581861744&_qi=RTM1053524"]http://www.ebay.co.u...&_qi=RTM1053524[/url]
[/quote]

Cheers man,

On my ebay watch list until I get paid :)
Brigante
[quote name='Rh1no' timestamp='1345759428' post='202980']
Cheers man,

On my ebay watch list until I get paid :)
[/quote]

No problem ;)

Was getting ready to pay 35quid for a mk2 one, then after a lot of searching I saw that one for 20quid n thought I'm bloody having that.

Then I clocked they also had the 2.5 for same price so thought I'd post it cause it might save a few people some money. Seems genuine enough and can't really complain about the price.
.Ryan
Not very good with the electric side of things so will not be attempting the second reverse light mod.
Brigante
[quote name='Rh1no' timestamp='1345761676' post='202982']
Not very good with the electric side of things so will not be attempting the second reverse light mod.
[/quote]

It's really easy mate I'm gonna get the rest of the part together in the upcoming weeks then do it myself.
the dark lord
[quote name='Brigante' timestamp='1345759893' post='202981']


Then I clocked they also had the 2.5 for same price so thought I'd post it cause it might save a few people some money. Seems genuine enough and can't really complain about the price.
[/quote]

Yes.... Me!
Brigante
Right mine turned up today so quick delivery

Trying to post a shot up of the new one against the original but photobuckets being bloody stupid and failing the upload even after a few attempts

But here's a quick test fit shot

[IMG]http://i1256.photobucket.com/albums/ii487/therealbrigante/621794_478694318815793_1053617294_o.jpg[/IMG]

Looks loads better. Now I just gotta get my 2 cree reverse bulbs, the red cree fog bulb n the sockets n I'm ready to go. Till then the old fog units back in.

But yeah I can now vouch for this seller the new fog units bang on for a 15quid saving over ford.
Lenny
[quote name='Brigante' timestamp='1345809145' post='203034']
Right mine turned up today so quick delivery

Trying to post a shot up of the new one against the original but photobuckets being bloody stupid and failing the upload even after a few attempts

But here's a quick test fit shot

Looks loads better. Now I just gotta get my 2 cree reverse bulbs, the red cree fog bulb n the sockets n I'm ready to go. Till then the old fog units back in.

But yeah I can now vouch for this seller the new fog units bang on for a 15quid saving over ford.
[/quote]

looks excellent mate,
the new clear unit looks a little brighter than the left one but this is due to the one on the right having a red bulb still in place giving a little bit of red tint in the unit thus making it look a shade brighter than the left on when a picture is taken.
but they are a pefect match in reality.
also dont purchase a mirror finish red fog bulb because they shine out pink instead of red lol
best results fit a cree red fog light along with the cree reverse ones.
Brigante
[quote name='Lenny' timestamp='1345813575' post='203046']
looks excellent mate,
the new clear unit looks a little brighter than the left one but this is due to the one on the right having a red bulb still in place giving a little bit of red tint in the unit thus making it look a shade brighter than the left on when a picture is taken.
but they are a pefect match in reality.
also dont purchase a mirror finish red fog bulb because they shine out pink instead of red lol
best results fit a cree red fog light along with the cree reverse ones.
[/quote]

In that picture mate there is no bulb in the new unit lol if you look carefully you can see the bulb hanging down in front of the tyre. Just popped the clear unit in for a quick photo then removed it and put the old red fog unit back in so I never bothered putting the bulb in clear unit.

I know mate meant to say in my previous post I was gonna get a red cree fog bulb. Gonna be about 40quid on bulbs ain't it? lol
Lenny
[quote name='Brigante' timestamp='1345814180' post='203050']

I meant to say in my previous post I was gonna get a red cree fog bulb. Gonna be about 40quid on bulbs ain't it? lol
[/quote]

yes around £35 - £40 ive just recently purchased the red cree fog light bulb for mine,
i had a silver red fog light bulb fitted before that but the cree's are defo worth the spend.
Brigante
[quote name='james132' timestamp='1325873138' post='159767']
For anyone looking for bulb holders just seen these:

MK4 Bulb holder:
[url="http://www.ebay.co.uk/itm/FORD-FOCUS-MK4-REVERSE-LIGHT-FOG-LIGHT-BULB-HOLDER-/190610629808?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2c614764b0"]http://www.ebay.co.u...=item2c614764b0[/url]

MK1/2 Bulb holder:
[url="http://www.ebay.co.uk/itm/FORD-FOCUS-MK1-MK2-MK3-BULB-HOLDER-INDICATOR-REVERSE-AND-FOG-LIGHTS-/170757194227?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27c1ec01f3"]http://www.ebay.co.u...=item27c1ec01f3[/url]

MK1/2 Plug:
[url="http://www.ebay.co.uk/itm/FORD-FOCUS-MK1-2-3-98-08-PLUG-WIRES-4-INDICATOR-REVERSE-FOG-LIGHT-BULB-HOLDERS-/170750300447?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27c182d11f"]http://www.ebay.co.u...=item27c182d11f[/url]
[/quote]

Grrr these listings have ended and I can't seem to find any more of them. Knew I should have ordered them ages ago :(
Stoney871
http://www.ebay.co.uk/itm/Ford-Focus-mk1-Rear-HatchBack-Reverse-Fog-Light-Bulb-Holder-2pin-98-04-/200805459559
Brigante
Here's the new clear unit compared to the original fog unit. Isn't genuine ford but it does the job

[IMG]http://i1256.photobucket.com/albums/ii487/therealbrigante/620341_478694162149142_1172635096_o.jpg[/IMG]
[IMG]http://i1256.photobucket.com/albums/ii487/therealbrigante/290597_478694238815801_1785178458_o.jpg[/IMG]
Brigante
[quote name='Stoney871' timestamp='1345843167' post='203144']
[url="http://www.ebay.co.uk/itm/Ford-Focus-mk1-Rear-HatchBack-Reverse-Fog-Light-Bulb-Holder-2pin-98-04-/200805459559"]http://www.ebay.co.u...4-/200805459559[/url]
[/quote]

Nice one mate already seen that though, contacted the seller if they would sell just one of them, and if they happen to have any plugs to go with it.

Can't see any plugs on ebay, messaged round a load of breakers but there's too bloody many to message round. Gotta play another waiting game now to see if any will get back to me.
.Ryan
Spoke to that ebay seller, confirms they are not genuine Ford. Part of me is tempted to pay the extra few quid for a genuine unit.
Brigante
I know mate knew they wasn't genuine ford but to be fair once its in you'd never know the difference. Functions and looks exactly the same, only difference is the markings on the back.
Lenny
[quote name='Brigante' timestamp='1345849530' post='203170']
I know mate knew they wasn't genuine ford but to be fair once its in you'd never know the difference. Functions and looks exactly the same, only difference is the markings on the back.
[/quote]

and you would probably be drilling through the markings to fit the second socket anyways. :)

while driving to work this morning i was thinking about the dual reverse lighting etc.
and at the momment when the rear fog light is active and you put the car in to reverse,
bot the red and white light are beaming from the drivers side reverse/fog unit and looks a bit odd.

but while driving in rain and fog this morning,
i came up with this idea
if i was to fit one of the auto off dimmers from Gen labs inside the boot panel and wire it to switch off the fog light when reverse is active,
[url="http://www.ebay.co.uk/itm/LED-DRL-DAYTIME-RUNNING-LIGHT-AUTO-SWITCH-RELAY-CONTROL-SIDELIGHT-HEADLIGHT-/230841116098?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35bf33e5c2"]http://www.ebay.co.uk/itm/LED-DRL-DAYTIME-RUNNING-LIGHT-AUTO-SWITCH-RELAY-CONTROL-SIDELIGHT-HEADLIGHT-/230841116098?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35bf33e5c2[/url]

then every time the rear fog light is switched on,
and the car is put in to reverse.
it will turn off the rear fog while reverse is active and then immediately put the red fog back on when the car is not in reverse.
but only when the fog light is switched on as normal inside the car.
Brigante
[quote name='Lenny' timestamp='1346061574' post='203532']
and you would probably be drilling through the markings to fit the second socket anyways. :)
[/quote]

Exactly my thinking mate thats why I couldnt be arsed paying 35quid for a genuine unit when I can get an as good as unit for 20quid when I'm only gonna butcher a hole in the back of it with me dremel anyway :P

[quote name='Lenny' timestamp='1346061574' post='203532']
but while driving in rain and fog this morning,
i came up with this idea
if i was to fit one of the auto off dimmers from Gen labs inside the boot panel and wire it to switch off the fog light when reverse is active,
[url="http://www.ebay.co.uk/itm/LED-DRL-DAYTIME-RUNNING-LIGHT-AUTO-SWITCH-RELAY-CONTROL-SIDELIGHT-HEADLIGHT-/230841116098?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35bf33e5c2"]http://www.ebay.co.u...=item35bf33e5c2[/url]

then every time the rear fog light is switched on,
and the car is put in to reverse.
it will turn off the rear fog while reverse is active and then immediately put the red fog back on when the car is not in reverse.
but only when the fog light is switched on as normal inside the car.
[/quote]

Clever boy as always mate. Very clever indeed ;) I did think the same at one point about it looking odd when both are on, but I dunno when I'll ever actually get round to using my fogs anyway so I'll be alright for now. Hopefully ordering my bulbs this week and fitting it all next week if I'm still outa work.
gforce
Gathering up the parts for this myself at the minute...

Got a genuine clear unit a while back for £7 BIN on the bay, and just got a stock one there now complete with bulb and holder to use as a donor unit for a fiver, so I'll still have my old standard one in one piece as well. There's a seller does the plugs on ebay for £3-4 so just need one of those and the 4m of wire now (if I can't find any lying around the shed). Don't think I'll be spending on the Cree bulbs just yet though. I'd find it hard to justify about £40 for bulbs that are so rarely used...especially the fog. Understand that the reverse bulbs would be a massive upgrade, but I'll see how I get on with two standard ones first I think.

PS Lenny, did you get my last PM reply a few days back? I hadn't got the chance to reply to you quickly and I think you may have 'left the conversation' then before I did. Just lookin a quick advisory on puttin the 12V socket in the boot.
Lenny
[quote name='gforce' timestamp='1346254462' post='203952']
Gathering up the parts for this myself at the minute...

Got a genuine clear unit a while back for £7 BIN on the bay, and just got a stock one there now complete with bulb and holder to use as a donor unit for a fiver, so I'll still have my old standard one in one piece as well. There's a seller does the plugs on ebay for £3-4 so just need one of those and the 4m of wire now (if I can't find any lying around the shed). Don't think I'll be spending on the Cree bulbs just yet though. I'd find it hard to justify about £40 for bulbs that are so rarely used...especially the fog. Understand that the reverse bulbs would be a massive upgrade, but I'll see how I get on with two standard ones first I think.

PS Lenny, did you get my last PM reply a few days back? I hadn't got the chance to reply to you quickly and I think you may have 'left the conversation' then before I did. Just lookin a quick advisory on puttin the 12V socket in the boot.
[/quote]

Look foward to the results mate,
3m of cable is enough but its sold in 2m lengths and 3m is required.
I missed your response via pm the last day mate sorry I don't usually do that sort of thing I always respond.
I have gotten todays pm though and responded.
Also shop around for the cree's mate you may get another bargin but I've heard bad reports on buying them directly from china on ebay. They send the cree bulbs but they don't work when fitted.
Lenny
[quote name='Brigante' timestamp='1346078837' post='203574']

Clever boy as always mate. Very clever indeed ;) I did think the same at one point about it looking odd when both are on, but I dunno when I'll ever actually get round to using my fogs anyway so I'll be alright for now.
[/quote]

I've purchased a Gen Labs auto off relay today for the rear fog light to switch off while reverse is active,
I'll post again when it arrives and fitted for those who may be interested.
Brigante
[quote name='Lenny' timestamp='1346267405' post='203987']
but I've heard bad reports on buying them directly from china on ebay. They send the cree bulbs but they don't work when fitted.
[/quote]

Then they take the pee trying to get out of giving you a refund and you end up raising a case with ebay.

Shopped around and got my cree fog bulb for 9quid so saved a fiver and it actually does work. Just gotta see if my new reverse lights work now when they come.
Brigante
Decided to get started on this and butchered my new clear unit ready for when the rest of the parts come. My 2 cree reverse bulbs, the bulb holder n the socket are in the post so if I'm lucky I'll have em by friday so then I can just wire it all up and job done.

Till then I've got this ready, leaving it aside over night to dry and I'll be cutting the hole in me bumper tomorrow.

[img]http://i1256.photobucket.com/albums/ii487/therealbrigante/242471_480794558605769_1025580191_o.jpg[/img]
Lenny
[quote name='Brigante' timestamp='1346270424' post='204008']
Decided to get started on this and butchered my new clear unit ready for when the rest of the parts come. My 2 cree reverse bulbs, the bulb holder n the socket are in the post so if I'm lucky I'll have em by friday so then I can just wire it all up and job done.

Till then I've got this ready, leaving it aside over night to dry and I'll be cutting the hole in me bumper tomorrow
[/quote]

Looks tidy mate.
Brigante
It'll do. Was a bit annoying and took a while trying to shape it down to get it to meet the unit flush without big gaps round the side. Nearly had nothing left lol
Brigante
[quote name='Lenny' timestamp='1346268148' post='203990']
I've purchased a Gen Labs auto off relay today for the rear fog light to switch off while reverse is active,
I'll post again when it arrives and fitted for those who may be interested.
[/quote]

I'd have been interested, but then I thought I never use my fogs anyway so I'm never really gonna find myself reversing with the fogs on either.

Still a great idea though mate and I may look into getting one at some point anyway.
Brigante
Bulb holder and socket came today so I've been a busy boy

The results:

[IMG]http://i1256.photobucket.com/albums/ii487/therealbrigante/2012-08-30170146-1.jpg[/IMG]

Can't really see that good cause it's day light but they are both on. Hopefully the cree reverse bulbs will come tomorrow so I can get rid of the minging standard bulbs and get me sexy white ones in :P

Overall very pleased with this mod and as other have said it's by far the best mod I've done so far :D
Lenny
[quote name='Lenny' timestamp='1346268148' post='203990']
I've purchased a Gen Labs auto off relay today for the rear fog light to switch off while reverse is active,
I'll post again when it arrives and fitted for those who may be interested.
[/quote]

UPDATE:
The GenLabs DRLR1 relay unit has arrived today.
Unfortunitly it will be Saturday before I can get time to fit it to the rear fog light and reverse feeds. But I thought id post a brief instruction on the wires and what to connect them to in order for the rear fog to switch off automaticlly while reverse is active.

I will update further with a loom diagram and colour reference of car cables on Saturday.
Lenny
fitted the auto off relay to the fog light feed yesterday and it works exactly as i expected it to with instant return of the fog light illumination when reverse is not active. this doesnt mean the rear fog is active all of the time, its only active when switched on via the light control switch as normal.
the only difference to the car now is; when the rear fog light is switched on. and the car is put in to reverse the rear fog will go off while the car is in reverse then seamlessly return when reverse is not active.
im happy with the results and to confim the connections for the GenLabs DRLR1 relay.

open the boot and remove contents,
remove panels to access the fog light loom and previously fitted second reverse light loom.

the fog loom is green/yellow positive feed then black for negative.
the second reverse feed should be red positive and black negative.

locate the middle of the rear fog loom inside the panel around 3 inches from the floor of the car and snip the loom completly in half ie. one snip of the cable.

then using a GenLabs DRLR1
take the rear fog line that leads down from the front of the car and connect:
red feed on drlr1 to green/yellow line from fog switch
black feed on drlr1 to black feed that is next to the previous one leading from fog switch to the light.

locate the red positive feed for the reverse and do not snip through the cable, instead use a stanley blade and pare a section of the sleeving to expose some copper terminal then wrap the gray feed from the drlr1 around the exposed copper section and seal with some electrial tape.

then take the other end of the fog loom that leads to the actual fog light bulb;
connect the yellow feed on drlr¹ to green/yellow line feeding to the fog light,
connect the blue feed on drlr1 to the black line feeding to the fog light,
Nitemare
@ Brigante

[i][url="http://go.redirectingat.com/?id=2061X563692&xs=2&url=http%3A%2F%2Fshop.ebay.co.uk%2F%3F_nkw%3Dbulb%2Bholder&xguid=67797923d86c6ec0b6c822574300ca2c&xword=bulb%20holder&xcreo=10203&xpid=0&sref=http%3A%2F%2Fwww.fordownersclub.com%2Fforums%2Ftopic%2F29347-guide-fitting-second-reverse-light-ford-focus-mk2-mk25%2Fpage__st__90"][color=#ff0000]Bulb holder[/color][/url][color=#ff0000] and socket came today so I've been a busy boy[/color][/i]

Can I ask where you sourced these from??

Cheers,
Nitemare.
Brigante
[quote name='Nitemare' timestamp='1347277953' post='205852']
@ Brigante

[i][url="http://go.redirectingat.com/?id=2061X563692&xs=2&url=http%3A%2F%2Fshop.ebay.co.uk%2F%3F_nkw%3Dbulb%2Bholder&xguid=67797923d86c6ec0b6c822574300ca2c&xword=bulb%20holder&xcreo=10203&xpid=0&sref=http%3A%2F%2Fwww.fordownersclub.com%2Fforums%2Ftopic%2F29347-guide-fitting-second-reverse-light-ford-focus-mk2-mk25%2Fpage__st__90"][color=#ff0000]Bulb holder[/color][/url][color=#ff0000] and socket came today so I've been a busy boy[/color][/i]

Can I ask where you sourced these from??

Cheers,
Nitemare.
[/quote]

From the same place that was linked earlier in the thread

Plug
[url="http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=170906965682"]http://www.ebay.co.u...em=170906965682[/url]

Bulb holder
http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=180965125409

But the parts you will need will be different mate cause yours is the facelift
Nitemare
Cheers m8,
I've already sourced the lamp for my MK2.5 from earlier in thread, thanks!! So just need bulb holder and socket to add to loom.

Nitemare.
Haz93
Think I might have a go at this mod. Seems simple and effective

Lenny, any chance of a video of that working mate?


This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2014 Invision Power Services, Inc.

Warning: require_once(/var/www/applications/ipb/3.4.5/upload/sources/classes/class_email.php): failed to open stream: No such file or directory in /var/www/applications/ipb/3.4.5/upload/lofiversion/ipsclass.php on line 1615