January 26, 2009, 11:37 am
Any help would be appreciated on this one. I need to bleed the clutch as i fitted a new slave. I have bought an eazi bleed kit . My question is how do I actually bleed this?
January 31, 2009, 8:03 am
once the eazi bleed kit is se up on the car ( connected to reservoir , tyre ect) its just a case of finding the bleed nipple on the clutch clynder which should be on top of the gearbox. putting some pipe from the nipple onto a jar or container to catch the fluid and then open the nipple. the pressure from the kit will push the fluid through the system.once no air bubbles are present in the pipe from the nipple,close the nipple and job done.