October 6, 2012, 2:44 pm
Hi I have 2 fault codes which keep re appearing and it's drivin me mad..
Codes are p0405 and p0401
P0405 says exhaust gas recirculation sensor A circuit low
And P0401 says exhaust gas recirculation flow insufficient detected
I've have these cleared a few times only to keep reappearing have also tried cleaning my egr which didn't work and also tried a new egr valve which also didn't work..
Any help guys would be great I don't now much about the fords but its driving me mad.. By the way cars a 05 mondeo 2.0 tdci 130 bhp euro 4
October 7, 2012, 9:21 am
have you tried the inlet manifold clearing that out mate
October 7, 2012, 10:09 am
i havent but after a bit of research this morning i was thinking of doing that as in my head thought maybe valve is operating correctly but if manifold is clogged up the flow of air may not be suffient in turn puttin on the engine light..might try taking it off later today...have you ever done this before?
October 7, 2012, 11:19 am
i havent but others have and seems easy job to do mate
October 7, 2012, 12:44 pm
I'll try that when I get a chance Sony do it any harm.. Maybe also worth mentioning I have a code p1000 as well.. Would it be possible that this p1000 code is stopping the light form turning off as egr maybe hasn't done a full drive cycle as ford talk about...
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here