Hi,

After hours of researches and i didn't find one exhaust which could fit my car, I would love to fit this kind of exhaust on my focus : http://www.ebay.co.uk/itm/Sport-Exhaust-Chrome-Tail-Pipe-Tip-Trim-Ford-Focus-Mk2-Hatchback-2005-2012-/300629037212?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item45fee3109c&clk_rvr_id=430815824099&afsrc=1

But this one will not fit coz the inlet diameter is 50 mm and mine is about 58 mm.

Do you have any links of this kind of exhaust which could fit my car please

Thank you

I was ld to believe that the 2.0L Petrol Miltek Exhaust would fit....

However most people opt for a Longlife or similar custom exhaust...

thanks for your answer mate.

No unfortunaltely the 2.0L petrol wouldn't fit coz the one i wanted was for petrol 1.6 ; 1.8 ; 2.0 and the inlet diameter is 50 mm.

Any link please ?

I purchased a 2.5" dpf back stainless performance exhaust from piper and im 1000% happy with it,
Perfect equal levels of smoke from both tips, purchased through Ruderacing.com
http://www.ebay.co.uk/itm/Piper-Stainless-Exhaust-Cat-Back-Duplex-System-Focus-2-0-04-10-Diesel-DFOC7AS-J-/260970118574?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cc307fdae

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2305.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2302.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2308.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2306_zps15bf0ddc.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/IMG_20120922_151705_zps4e78f8da.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2317.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2318.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2319.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2320.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2321.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2322.jpg[/IMG]

[IMG]http://i575.photobucket.com/albums/ss192/lennymanwoods/Image2324.jpg[/IMG]

Cheers for that very clean and great work no doubt about that

But i'm looking for a pipe like in the link i showed you, it's like the audis s3 you know

[quote name='FordFocusman' timestamp='1357984144' post='225982']
Cheers for that very clean and great work no doubt about that

But i'm looking for a pipe like in the link i showed you, it's like the audis s3 you know
[/quote]
Ow rite sorry lol
Your looking for a twin exit on the silencer side only.
Perhaps contact the seller and ask if the spec is internal or external diameter.
And these type usually sleeve on to the pipe pertruding slightly from the rear silencer.
It doesnt fit the existing pipe from silencer to tip.
It replaces that whole section.
So you may still be good with that one mate.

I did and the inlet diameter is 50 mm and mine is about 58 mm, the petrol pipes are a bit smaller than diesel ones that's why it will not fit but i'm going to get a quote from Longlife for a twin exit

[quote name='FordFocusman' timestamp='1357991462' post='225991']
I did and the inlet diameter is 50 mm and mine is about 58 mm, the petrol pipes are a bit smaller than diesel ones that's why it will not fit but i'm going to get a quote from Longlife for a twin exit
[/quote]
shouldnt be more than 50pounds fitted.
Just hard to keep em clean on diesel, but if you apply some chrome polish as soon as when fitted,
It will help protect it from suit and carbon.

yes absolutely agree
i will put some chrome polish on it period !

You can get a twin exit exhaust like the one in your link from bastuck. The best place to look is on europeancarparts as they sell the bastuck exhaust systems that are specific to your engine size.

Also there is a guy on focusowners.com who is also on here but not active much who swapped his 1.8 petrol exhaust for a 1.8 deisel exhaust and they look the exact same size and he fitted a tip like your link with no probs. best to see if you can get in touch with him, think his name is Franno on focusowners

thanks for the information mate.

I found a franno but last time he was online was in 2011, maybe it is not him.
if you have a link it would be awesome mate
thanks

give these a buzz... they will sort you out...
[color=#f97700]
TOP GEAR RACING[/color]
Gatehouse Way
AYLESBURY,
Bucks.
HP19 8DB
TEL: 01296 433011

custon made on site exhaust company to your spec... i use the stafford branch

all right i will check it out
thank you very much