Hi all i have a fiesta 1.3i endure e engine 2001 51 plate. When iam driveing my heater blows out warm/cold air but once i stop and idle the engine for a few minutes it blows out hot air like it should but once i drive of again it blows out warm/cold air again now in august 2008 i had the heater valve replaced and from then to 2night the heater was working fine but now it not has hot like it used to be anyone know what it could be cheers alan.

Anybody

Might get more luck posting this in the fiesta section rather than the focus section kidda. But my best guess is an airlock in the heater matrix.

[quote name='SierraYankee99' post='51575' date='Nov 30 2009, 07:21 AM']Might get more luck posting this in the fiesta section rather than the focus section kidda. But my best guess is an airlock in the heater matrix.[/quote]

Did'nt know i posted it in the focus side if it is a air lock what the easyest way to get rid cheers alan

Sounds like the thermostat is stuck open.

Does the engine get up to temp just as quick?

Piggy

If the thermostat was stuck open it would blow hot when the engines hot. If it was stuck closed it wouldnt get hot at all. It wouldnt just get hot when the cars stood.

If its an air lock the heating system needs bleeding to get the air out. Not 100% sure how you'd do that. Of course its possible the part you replaced last year is faulty and needs doing again.