• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


Alucard

New Member
  • Content count

    1
  • Joined

  • Last visited

About Alucard

  • Rank
    Newbie

Profile Information

  • Ford Model
    mondeo
  1. EGR Clean

    Hi as you have now cleaned the EGR valve you could now blank the valve off by making up a small blanking plate from a piece of 1mm steel or alloy plate, this would then stop the future build up of the black sludge in the valve and inlet manifold and the engine would then not have to ingest its own exhaust so it will run better and you may get a few more MPGS. I have owned 3 tdci diesels and have done this mod on all of them and i found it well worth doing just to keep the inlet manifold and EGR valve clean. Its a easy mod to do as long as you know your way around the engine and the only cost would be a few pence for the metal for the blanking plate i made mine from the base of a old aluminium saucepan! and you should be able to complete the job in an afternoon.