Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About UpTheHammers

  • Rank

Profile Information

  • Ford Model
    Zetec s Mk7
  1. Should we do the same as these guys did with there Tyres and Alloys http://news.bbc.co.uk/1/hi/england/7937839.stm From my understanding they all got new tyres after speaking to one of them so maybe this forums of users could too
  2. Uneven wear,Bald spots,Vibrations i had all these symptoms
  3. Make that 5 now just come back from tyre fitter with yet another Buckled Alloy How about we collect all our alloys and go dump them on the door step of Fords Office in Brentwood see if they listen then
  4. Make that another 4 on my 2009 fiesta ford
  5. I fitted my own £15 from ebay very easy to do and did not remove bumper but not electro ones Just to confirm there is a Rubber gromet under the car to pass the cables into the car
  6. Try this link to have them switch on with the head lights and stay on http://www.fordownersclub.com/forums/index.php?showtopic=11157&st=0&p=72121entry72121
  7. Its a common problem at the bottom of the doors there are drainage holes to let the water out you just need too clear block holes :D
  8. I have Hankooks on my Zetec s and have covered 22,000 miles and a reckon will get 2000 more from the fronts Backs have about 4mm left was going to put hankooks back on when there scrubbed
  9. did you change the pin outs?
  10. Double sided sticky pads from homebase about £2.50 stuck them on then cut off access works a treat
  11. I Bet you can't wait for it to get Dark again LOL :D
  12. Hi J i could not sleep last night thinking about your problem so i got up extra early to check the pins and i got it wrong it did try 7 and 12 first but could not see the connection properly as it was all wrapped up nice in black insulating tape just undone it all and the pins are 11 and 12 Sorry my mistake
  13. Hi J i will double check tomorrow the pin outs looks good from the pics my lights don't dim at all What color? did you go for in the end and where did you get them so Quick?
  14. Try this seller he has loads and all colors http://cgi.ebay.co.uk/60cm-LED-Interior-Grill-Decoration-SMD-Bulbs-White-XK_W0QQitemZ180434642482QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2a02be2632 my one was very brittle so warmed it up first with a lighter (made it more flexible to work with ) before sticking it and used double sided stick pads as the one that comes with it are not very sticky I went for red as i could cannot fined a perfect match to the Burnt orange look but goes as the needles on the dash are red Going to install a couple of white ones in the Boot as the ford one is Poor will post pic soon