AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


bigbossowen

Budding Enthusiast
  • Content count

    54
  • Joined

  • Last visited

About bigbossowen

  • Rank
    Settling In Well
  • Birthday 06/17/1982

Profile Information

  • Gender*
    Male
  • Ford Model
    mk3 mondeo tdci 130
  1. hi i need a Accelerator cable for a 1.25 ztec but ford have stop making them where can i get one????
  2. hi all i am looking to put polly bushes on the fester iv used the rear beam pollys befor and found then really good but i need some for a nother and lower arms to so i was thinking of puting pollys in the lower arms is this a good thing to do or not???
  3. hi its a 2000 x reg 1.25 i been mucking around with cars for a long time but first cam belt i now it needs timing pins for the two cam shafts i want to no if there is an easy way to get it done there is always an easy way around something
  4. now i have got your attenuation i have two things to ask i have a 1.25 fiesta and i need to do the timing belt can you all knowing ford gods help me with some advice and the easiest way to do this and is there any other parts need changing as i am there. No2 i need athrottle cable as well but all the motor factors can not get one any ideas thanks gary
  5. i had the same thing on my mk4 i tried what you did with the dryer but it soon pulled out tried glueing and did not work the on lt the only thing you can do is replace the door card
  6. hi all will a rear bumper from a 2001 mondeo fit a 2004????? thanks gary
  7. hi all right i have a set of 18" team dynamic mesh 3 have good tyres goodyear eagel f1 on two and budget on the others they all have 4/5 mm. i want £250 for these but i need a set of steels with legal tyres as part of the deal. if you want to see in detail i can email them. http://www.madmotors.co.uk/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/m/e/mesh-3.jpg
  8. i have had a look around the forum and have not found any think on this as it must be a one off but i will ask anyway has any one else had the windscreen come lose as mine has come lose across the top seam. thanks all
  9. i have had a look around the forum and have not found any think on this as it must be a one off but i will ask anyway has any one else had the windscreen come lose as mine has come lose across the top seam. thanks all
  10. hi all i have some work to do on my mon 130 tdci. the biggest job i need to do is the clutch and dmf but i all so have to change the aux belt and the water pump belt is this worth pulling out the engine for this?? and if so is there any other job that i should do while it out?? thanks all
  11. i was hoping that was not the case.
  12. i did fear that but on the flip side at least i have not got to pay for a gearbox rebuild as well as a whole dmf and clutch....
  13. hi all. right im having problems with changing gear from 1st to 2nd im geting a grinding but if i go from 1st then neutral then in to 2nd its fine its bad when its cold and getts better the warmer she gets but some times is there when warm do you think this is the clutch or a synchro-ring. do ford get much problem with there 6 speed box. i now there dmf system is not amazing thanks for your help
  14. hi this one is for a friend he has a 98 mk4 it had developed a miss fire with a big lack of power. he has for reasons only know to him he has put it in to ford and they have come to the conclusion that fault is the ecu. now if i was to buy a second hand one would it need programming or is it a case of plug and play. thanks all.
  15. hi this one is for a friend he has a 98 mk4 it had developed a miss fire with a big lack of power. he has for reasons only know to him he has put it in to ford and they have come to the conclusion that fault is the ecu. now if i was to buy a second hand one would it need programming or is it a case of plug and play. thanks all.