AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About able

  • Rank

Contact Methods

  • First Name

Profile Information

  • Gender*
  • Ford Model
  • Ford Year
  • UK/Ireland Location
  • Annual Mileage
    0 to 5000

Previous Fields

  • Location
  1. Hi thanks for Responce my problem is if I require to operate sat nav when ignition is switched off planing routes ect, if I have not used it recently I find the battery flat on device so I then have to keep ignition on to recharge unit while Iam planing trip. Update I may have sorted problem out if you use the cig plug on the back of the centre consul this is live without ignition on . Not sure if it goes to sleep after locking down.
  2. Hi anybody know how to make the cig lighter Live all the time mine is only live with ign on. i would like to be able to charge my TomTom go60 while Iam at a standstill as these tomtom don't seem to hold a charge very long once the ignition is switched off I have seen some discussions about the opposite problem all talking about moving a Fuse to a differant possision. Has anybody got any advise. Vehicle Ford Fiesta Titanium December 2015
  3. Hi everybody vehicle Ford Fiesta ecoboost titanium in candy red purchased Dec 2015 . Having just recently purchased this Fiesta I decided to look for info on fitting front mudflaps on this forum but could not find any info for my vehicle perhaps nobody fits mud flaps anymore.? just in case anybody is interested in fitting them the following may be of help. purchased from main ford dealership front mudflap kit part number 1531631 on installation you will find the instructions provided are terrible just pictures to follow o/k till you get to the fitting of the bolt clamp bracket the instruction don't properly show the place for the bracket I Fitted my ones on the underside of sill where there seems to be a spare piece of plastic sticking out still not sure if this is correct but looks to be the only place possible. Also you have to remove the plastic rivet at the bottom of the inner cover this is one of the fixing points for mudflap you are supposedly got to use this plastic rivet again (non in kit ) the only problem I found was that the plastic rivet is now to short to go through the extra thickness to secure it properly the rivet is only about 6mm long so will not fix correctly I am going back to dealership to see if you can obtain a longer rivet you need one about 10mm. On fitting the top part of mudflap there is a spring type "U" clip you will need a large ajustable per of grips to be able to press this onto the arch & mudflap ,I used what I call a adjustable pipe grip not sure that the correct terminology for this is. The only other thing of concern was the Quality of mudflaps not very good made of hard plastic so not sure how long these will last for. hope info is useful to somebody
  4. Hi just purchased a new Fiesta Titanium in candy red if Iam in the wrong posting please advise. My question is over the ford paint warranty can I apply some sort of protection for the wet winter we are experiencing or would ford not allow any sort of polish ect . If it's o/k to apply a polish of some sort that will not effect the warranty , out of the many products available has anybody got any advise . When you get your new car nice and shiny what do ford use on the pre Dellivery. Thanks graeme
  5. Hello,

    My name is Justina,i saw your profile today at this site ( and i love it also became intrested in you,i will also like to know you more,and i want you to send an email directely to my email address so that i can reply your mail and also give you my picture for you to know whom i am.Here is my email address( i believe we can move fro...

  6. Thanks for the link. Had a browse there picked up a couple of hints but no info about the Estate version had another look at mine removed rear Lights behind them looks as though there may be a couple of pop rivits ?? not sure if they are doing anything will investigate further. Thanks
  7. Hi can anybody advise on rear bumper removal on a Focus Estate 2001 as I’m trying to fit the reverse sensor kit. I have removed the 2 x10mm nuts from inside the boot aperture , 2 x screws holding wheel arch cover. 2 x 10mm end fixing nuts hiding under wheel arch cover. 4 screws from top of bumper 4 sort of clips under the bottom edge of bumper. But I still can’t get it Off looked in Haynes manual no help there. Has any body got any advise Thanks
  8. Hi Ford Focus 2001 X Reg 1.6 Zetec S , Auto , Estate VIN --------DNYT11404 Has anybody got the Ford part number for the Cambelt kit Thanks buzz
  9. Hi Thanks for your very explicit Instructions. You have taken the pressure off me to get it repaired before the Mot is due in the next couple of weeks. Sorry to be a Pain but do you require any special tools to remove the Steering wheel other than a socket set and is the clock spring a repairable item or do you just buy a new one . any Idea what the cost may be. Thanks
  10. Hi thanks for the info.couple of Questions. 1 What is a clock Spring ? 2 Would this fail the MOT test Thanks
  11. Hi Any help please Ford Focus 2001 Auto Estate 1.6 zetec. When operating my Indictors they do not cancel on completion of turn. I have removed the Indicator Switch but it seems to work o/k in your hand the little toggle looks fine. is there a canceling ring on the column that can be replaced ?? if so how do you access it any body got any ideas ? Thanks