AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About JPL

  • Rank

Profile Information

  • Ford Model
    Kent 1600 Engine
  1. Hello All, Has no one got any opinions or advice on this one? I have since ordered the new correct carb - DGV (Manual Choke) Anyone have any advise on best settings/jetting with a Formula Ford Kent engine? Many thanks JP
  2. Dear All, I hope you are all well. I am running a Formula Ford with a Kent 1.6 engine. (Standard cam/crank/lightened flywheel/dissy replaced with electronic ignition) We have the standard 32/36 DGAV Webber and are suffering from a loss of around 16bhp in power. I put this down to a number of factors: 1. Very poor cast Intake Manifold. 2. Reverse orientation of carb due to chassis shape 3. Oversize/ill fitting carb to manifold gasket 4. Jetting and carb set-up Points 1-3 are being rectified but I was wondering if there is any tuning I can carry out in order to improve our power. All valves and seats including timing have been set accordingly. We are allowed to change the following according to the rules: 1. Jetting 2. Opening of venturi/throttle together 3. Remove cold start and diffuser bar 4. Fit anti-surge pipes We are not allowed to blue print/polishing or reprofile the carb. Any help would be appreciated I want to get the best out of our carb and engine. JP