Ford Owners Club - Ford Forums Messages

Club Announcements

Ford Fair 2016: Tickets and stand passes are now available to purchase. More info here.

Review your Ford: Help others when it comes to buying a car like yours and review your Ford now

Ford Car Parts: View All ford car parts by category. Look for Ford Car Parts now!

AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About drummerian

  • Rank

Profile Information

  • Ford Model fiesta
  1. Fiesta MK3 Inlet Manifold

    bump...still having problems with this :(
  2. Fiesta MK3 Inlet Manifold

  3. Fiesta MK3 Inlet Manifold

    Hey ppl, So we have just replaced the engine in my feista after the last one spat out a piston. However, then engine that is now in there is a dizzy model (slightly older) than the one that came out which was of the coil pack variety. I have sorted a dizzy and that is working fine. The problem came today when i tried to bolt the carb and inlet mainfold to the engine. The carb is off the engine that blew up and we did not get one with the replacement (the older engine). Unfortunatly it appears ford has changed the shape of the inlet to allow room for the dizzy as well as changed the bolt hole positions. Options: 1. Modify existing mainfold (the intakes line up, just not the holes :( 2. Find 1 of the older inlet manifold type... Any ideas? Thanks! p.s. i also need a dizzy clamp if you can help me out with that too?!
  4. back to the top :D
  5. So the story: Driving home from guildford my friends fiesta decided to spit out piston 1 all over the road. Several weeks later i am called in to help swap this out for a 'new' engine! Anyway, spent the last 2 days getting the old engine out and new one in. Basically here are the problems, sorry for a relatively quick post, just need to get this out there! Problem 1: The engine that was in the car has a 'dizzy' system i have never seen before (being into older minis i only ever see dizzys). Basically the 4 HTs plug into a block, about 10cm by 5cm and that simply bolts to the engine (just as a mount rather than anything else) now the problem is the 'new' one appears to hae a hole for a dizzy (the standard type i know about ). Need to know what to do about this :P Problem 2: Clutch. As a general test i put the car into gear and pulled it forward, great all the gears work. And in N it rolls nicely (rather than stiffly from turning engine over aswel). However when my beautiful assistant presses the clutch down the car is still stiff to roll. The clutch arm moves via the cable nicely, just a bit confused on this one <_< Thanks as always Drummerian p.s. the one off the broken engine is something like this ;)