• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


duncanda

Budding Enthusiast
  • Content count

    5
  • Joined

  • Last visited

About duncanda

  • Rank
    Newbie

Contact Methods

  • ICQ
    0

Profile Information

  • Ford Model
    Fiesta MkIV 1.25 Ghia
  1. fiesta cambelt

    I've been reading some other forums and would agree with you that you don't need the engine out. Think I'll use a different garage and leave you r Kyber Pass alone. ;)
  2. fiesta cambelt

    Nathanlee-miller - how did you change your cambelt? I was quoted something like £350 by a garage to change it because they said it was an "engine out" job. Cheers
  3. Water in top of cylinder head

    Got the replacement core plug (£1.39), but couldn't remove the old one . Twisted out of shape the 1/2" extender bar I used, bought a stronger one and still couldn't budge it. Decided to buy some Evo-Stik Hard & Fast metal epoxy putty and pushed it into the hole and it appears to work. For your info if you ever need to try to remove these core plugs, you need a 15mm hex key and more musle than me.
  4. Water in top of cylinder head

    After closer inspection coolant water is seeping up through the centre of what must be a core plug in the top of the cylinder head. It's a core plug with a 14mm-15mm hex centre. Hopefully I can extract and replace it?
  5. Hi. Hope someone can help. I have a 1.25 zetec engine and I changed the spark plugs a couple of days ago and noticed a little oil sitting in the top of the cylinder head. I cleaned it up. Wife used the car for a couple of days and said eveything okay. I changed the oil today, took it for test drive and felt it was firing on 3.5 cylinders. Took plastic cover off cylinder head cover and noticed water (yes water), about 150ml sitting in the top of the cylinder head between plugs 3 and 4, obviously shorting the plugs. Cleaned up water and after a 10 minute drive, water has reappeared. How's it getting into the top of the cylinder and what's the cause? Appreciate your ideas.