• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


New Member
  • Content count

  • Joined

  • Last visited

About Pete54

  • Rank

Profile Information

  • Ford Model
    Fiesta Flame
  1. Door Trim?

    I fitted one of these yesterday. Here are a few tips. The old white clips can be removed with a flat ended screwdriver. When fitting the new one remove the rubber door seal of the edge of the door first, then slide the black plastic rim of the door trim onto the metal edge of the door, before pushing into place the 3 white clips into the oval holes in the door. Then replace door seal. On my first attempt I pushed the 3 white clips into place first before I realised that the rim needed to fit over the door edge. As a result the trim wasn't flush - but fortunately I could unclip the fittings without breaking them, and I could start again.