Chrishy

Budding Enthusiast
  • Content count

    4
  • Joined

  • Last visited

About Chrishy

  • Rank
    Newbie

Profile Information

  • Ford Model
    2.8 V6 Cologne
  1. Any one out there need parts from a 2.8 V6? Its a tired engine that has come out of a Land Rover. Its complete apart from the flywheel bolts, manifolds & doesnt have a fuel pump. It has Weber with manual choke & the electronic ignition unit. Would be very useful for parts - anyone interested
  2. Well - could not find one so I asked a guy named Clive from a land rover forum I am a member of if he could help me out. I sent him the old hose & he made a die & a nice new silicone one. So if you need a V6 bypass hose he already has the die! or if you need something special give him a try cliverlamb@googlemail.com There is a web site but not its not finished http://www.blacksheepoffroad.co.uk/
  3. Hi Hi - I posted this request in the Classic Ford section but you guys hopefully have an answer :) I have a Granada 1982 2.8 V6 engine (in my 1966 Series Landrover) & I have tried to get hold of a bypass hose today. It's the hose from the back of the thermostat housing up the side of the block to the inlet manifold about 9 inches long. No one appears to stock this or offered an alternative supplier. It must be the same as the V6 Capri / Sorpio etc that are much later. Can anyone suggest a supplier either close to Dover in Kent or mail order? I have numerous suppliers for all the very old landrover bits but I dont know any old Ford part suppliers. For future reference a part No listing for this engine would be usefull - anyone have one? Many thanks Chris.
  4. Hi I have a Granada 1982 2.8 V6 engine (in my 1966 Series Landrover) & I have tried to get hold of a bypass hose today. It's the hose from the back of the thermostat housing up the side of the block to the inlet manifold about 9 inches long. No one appears to stock this or offered an alternative supplier. It must be the same as the V6 Capri / Sorpio etc that are much later. Can anyone suggest a supplier either close to Dover in Kent or mail order? I have numerous suppliers for all the very old landrover bits but I dont know any old Ford part suppliers. For future reference a part No listing for this engine would be usefull - anyone have one? Many thanks Chris.