Hi guys, I have similar problem as above with fiesta durashift automatic, it does not start at the moment, the gears seemed to be changing ok when it was driving, but it had moments when it would not start, then after some time it starts and drives well until next time. A couple of days ago it started ok, took off with the first gear but then it was only reving but not pulling. I had to tow it home and after coming across this forum decided to do the same adjustment to shift actuator as described in the above posts. I thought that would solve my problem, but to my disappointment, the rack was not stuck and the plastic housing was smooth so the rack was able to slide normally. After I assembled everything again, it started to my surprise, and I drove a few miles with it, gears changing nicely, and then suddenly it got stuck on the second gear and was not pulling anymore, only revving, and it was not possible to put it into any gear after that. It hasn't started since, and I am not sure what the problem could be. The gearbox shaft, that is going into shift actuator, seems to have a mind of its own, its moving up and down when the ignition is on, maybe that is normal, I don't know. Maybe some of you had similar problems and could drop me a hint what to do in this situation. I had it put on diagnostics, I got some codes about solenoid and incorrect data from the ecu. It is probably down to electronics more than mechanics I guess, but maybe some of you have some thoughts about it, I would greatly appreciate if you could share them here. Thank you.