• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


fordowner

New Member
  • Content count

    1
  • Joined

  • Last visited

About fordowner

  • Rank
    Newbie

Profile Information

  • Ford Model
    Focus saloon 2.0 ghia
  1. Cambelt gone??

    Hi, With ignition off, feel around cam belt covers, you may well find the belt is somewhat slacker, better still remove the cover to view the belt and tensioner wheel. If the plastic moulding around the outside of the tensioner wheel has torn away then the tension on the belt will have been lost, allowing the belt to jump a tooth or two. Otherwise the belt could have suffered damage (Wear and tear) and jumped on its own accord allowing the valves to be bent by the pistons. If you have tried turning the engine over on the starter motor you may have heard the engine turning over like a fast sewing machine, if so you have lost your compression as a result of a number of bent valves - probably 8 exhausts (From my personal experience, 2.0 Petrol!) My damage was 8 new exhaust valves (guides remained in-tacked and with no cracks - very luckily!) grind in valves and assemble then reset the valve tappet shim clearances (subject to your year/cc/fuel) This could have cost more but it still cost enough with gasket set, head bolts cambelt kit and labour, etc. I strongly suggest you contact the local engine reconditioning shop just outside Oxford, the long established one, see yellow pages. They will help with the head repairs and spares. Good Luck!