rajs

Budding Enthusiast
  • Content count

    4
  • Joined

  • Last visited

About rajs

  • Rank
    Newbie

Profile Information

  • Ford Model
    focus 1.8 lx
  1. Hello would appreciate some info please before I buy ? Looking at the above car i noticed that when I enter the car reg when getting insurance quotes it comes up as 2009 Mondeo titanium x (140) is the (140) relates to bhp ? The advert states it had a replacement reconditioned engine at 170k uprated brakes ect and now has 203k on the clock ,and that the bhp now is 164, also had a lot of suspension replaced ect , would this be okay on this car ? should there be anything i should look into / worry about ? thanks
  2. Hi my sister had a ford fiesta 1.4 tdci 2007 , i looked at it it has ac which is not functioning ,it seesm to me that it could be an electrical fault , has anyone a diagram of the wiring ? does the 12v supplied to the pump / elcetromagnet come via a relay ? can i test for 12 power to unit , i should see 12 applied when ac switched on ? As i dont hear any noise from unit or change in rev from engine when i press the ac button on in the car , thanks
  3. Hi my sister had a ford fiesta 1.4 tdci 2007 , i looked at it it has ac which is not functioning ,it seesm to me that it could be an electrical fault , has anyone a diagram of the wiring ? does the 12v supplied to the pump / elcetromagnet come via a relay ? can i test for 12 power to unit , i should see 12 applied when ac switched on ? As i dont hear any noise from unit or change in rev from engine when i press the ac button on in the car , thanks
  4. Hi , lost my car key , i only had one given upon purchase , i have a 1999 1.8 focus, I wa s told by ford that only way to get key cut and programmed was to remove the door barrell , which i have done , eventually . But now they want th ecar as well ! Apparently need programming via laptop ? Also key number is inside barrell , havnt attemptedto dismantle that , dont think i will . My question is , Ford is wiling to make a key up , probable cost £40 , after dismantling barrell. But to program key cost another £100-120 . Is there any way i can program the key ? what do i need apart from a laptop , any special software , connecting leads ect ?thanks.