• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


josh

New Member
  • Content count

    1
  • Joined

  • Last visited

About josh

  • Rank
    Newbie

Profile Information

  • Ford Model
    ford focus
  1. Hello everyone, About one year ago I purchased a 2002 Ford Focus 1.6 Petrol. The car at this time had done approx 25,000 miles. After having the car for about 2.5 months the engine management light came on. I took the car back to the garage and they diagnosed a camshaft position sensor fault. At this time they simply reset the fault (did not change anything). I took the car back and after a month the light came on again. Again, I took the car back to the garage and it showed the same fault. After several trips and lights showing the garage told me that they had replaced the sensor with a new original Ford part) and that they read the voltage output from the sensor and it was fine. (I have no proof they did this however). To cut a long story short the light still comes on and as I got fed up of going to the garage I purchased the software myself to find the fault code. The fault is still "camshaft position sensor wiring malfunction). I have taken the sensor out of the engine and I can not find any Ford part numbers on it. The car runs absolutely fine even when the light is on. When you reset the engine light it takes varying amounts of time to come back on, from days, weeks to months but it is always the same fault. What would you recommend? Haynes manual suggests measuring the resistance of the sensor? Is there any way I can easily check the wiring. Would it be worth buying a new sensor? Thanks Joshua