Ford Owners Club - Ford Forums Messages
Ford Fair 2016: Tickets and stand passes are now available to purchase. More info here.
Review your Ford: Help others when it comes to buying a car like yours and review your Ford now
AdBlock WarningParts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.
My name is Justina,i saw your profile today at this site (www.fordownersclub.com) and i love it also became intrested in you,i will also like to know you more,and i want you to send an email directely to my email address so that i can reply your mail and also give you my picture for you to know whom i am.Here is my email address(email@example.com) i believe we can move fro...
Steve, Firstly thank you for all your help and the pdf it has been very helpful as after looking at the programming order i have noticed the order goes from the transmission>184.108.40.206 but im sure my auto electrician has programmed them in the order Transmission>220.127.116.11 Is the order in the diagrams definitely the order as my AE tells me and its uncommon for engines them to be programmed Transmission>18.104.22.168. If this is the case it could be the answer to my problem and i will get him out asap to re-programme them in the order of the diagram. Thanks again for all your help Steve Regards, Shaun
Hi guys, Thanks for the advice last time its much appreciated.heres a quick update on the car. Had the diagnostics expert out, he Re-programmed the injectors and its all tuned up correctly, its kicking and sounds like its about to stat a little more than before but still wont go! Even though its stil not starting he noticed something he didn’t before and says its quite unusual. With the ignition on, the engine management light is on as should be, when turning the key to start the engine kicks but wont fully start up. He tells me after a few attempted but failed starts the management light should go off automatically but its staying on. Does anyone have any knowledge or ideas on this? Is there a fuse in the ECU that could be gone? could the whole ECU be gone? Any ideas right now would be useful as I am all out! Again thanks for the replies last time ☺
Hi everyone, I have been recommended to try this forum by a friend as I am having a nightmare with a 2004 Mondeo TDCI and ANY help, advice or suggestions would be much appreciated as im pulling my hair out. -It’s a 2004 TDCI 115bhp originally but the engine blew -It was changed to a 130bhp which was running perfectly in the donor car -It sounds as if it is just about to start but wont actually go -Flywheel, injectors (changed twice), injector pump all new also at correct pressure and its still not going. -Taken to Ford and put on every piece of diagnostic machinery and not one fault code showing up so its obviously something that the diagnostic is missing or cannot detect. -I have checked and double checked everything as much as I can and I am running out of money and patience and as some of you guys are very knowledgeable in mondeo engines if anyone has any idea as to what it might be, anything I could try or double check or have even encountered such a problem before and have some advice it would be much appreciated. Thank you in advance, Shaun