• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


farrenrob

Budding Enthusiast
  • Content count

    7
  • Joined

  • Last visited

About farrenrob

  • Rank
    Newbie

Contact Methods

  • First Name
    paul

Profile Information

  • Gender*
    Male
  • Ford Model
    fiesta
  • Ford Year
    2001
  • UK/Ireland Location
    Warwickshire
  • Interests
    Travel
    Computers & Electronics
    Sports & Leisure
  1. The petrol pump on my fiesta 1.25 zetec has packed up, i have purchased a replacement from a breakers yard .All the connections on the pump are the same but on my car there are four wires to the electrical connector but on the one i purchased there is five wires, does anyone know the difference.What is the extra wire for ?
  2. Fiesta 1.25 Zetec 2001

    Do you have to drop the fuel tank to do this
  3. Fiesta 1.25 Zetec 2001

    I have a Fiesta that has been standing in the garage for about 12 months, i went to start it recently after charging the battery as it was flat but the car would not fire.There is no priming sound from the fuel pump when the ignition is switched on so i swopped the fuel pump relay and checked the fuse.The inertia switch was also ok but still no noise from the pump.Can anyone tell me how to check if there is any supply to the pump.Any help would be much appreciated.Thank you.
  4. Mk1 1.4 Zetec Se Thermostat Housing

    Thanks for that Arthur it does have a rubber seal but I wondered if the face that meets the engine block should have a gasket as I omly noticed a rubber seal on the one port.Thanks for your help its much appreciated
  5. Mk1 1.4 Zetec Se Thermostat Housing

    Hi Arthur, Thanks for your reply,the image that you have put on is not the same as the one on my zetec
  6. I have a mk1 ford focus zetec se 1.4 and the thermostat hosing is leaking.(its the one positioned at the left hand front of the engine with two pipes going to it)I have purchased a new housing but there didnt appear to be a gasket supplied with it.Could anyone tell me if this is normal and it is fitted without a gasket or if one should have been supplied.Thank you
  7. Washer Jet Removal

    Could anyone tell me how to remove the washer jets from the bonnet of a mk5 Fiesta.Thank you.