Ford Owners Club - Ford Forums Messages
Ford Fair 2016: Tickets and stand passes are now available to purchase. More info here.
Review your Ford: Help others when it comes to buying a car like yours and review your Ford now
AdBlock WarningParts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.
Vehicle Focus C-Max 1.6TDCi 2005 Scan testresult shows Mass air flow high 119.41 gms/sec. This is constant at all RPM. Voltage readings on MAF plug DISCONNECTED ign.on Pin 1 7.15V, Pin 2 Ground, Pin4 Batt+ 12.17v, Pin 5 11.08V. Pin 3&6 not used. I do not understand why pin 5 is at approx 1v below B+. This is the MAF signal wire, I expected to get 5v. Pin 1 is IAT signal wire I also expected to read 5v. Can anyone throw any light on these readings, have you come across this before on any vehicles using this engine i.e Citroen/Peugeot, Mazda etc. Voltage readings on MAF plug CONNECTED ign.on engine not running. Pin 1 2.32V, Pin 2 Ground, Pin4 Batt+ 12.15v, Pin 5 10.89V. Pin 3&6 not used. IAT sensor showing 1 deg.C above ambient (looks ok) When engine is running the IAT sensor records correctly the B+ pin 4 is at 13.92v(expected) the maf sensor signal at pin5 is 12.42v increase due to alternator output. The car runs and performs normally I am monitoring fuel consumption but have no figures yet.