• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


jjbell7

Budding Enthusiast
  • Content count

    3
  • Joined

  • Last visited

About jjbell7

  • Rank
    Newbie

Profile Information

  • Ford Model
    fiest 1.8td flight
  1. central locking problem

    Thanks for the advice guys. You've got me thinking now that it may be the bonnet as it's had a front end collision at some point and not everything lines up perfect and you have to jiggle the key to get the bonnet to open. I'll also try the other suggestions. many thanks ;)
  2. central locking problem

    Hello, The central locking on my wifes Focus 1.8 Ghia 02 plate has a fault. When I try to use the fob it locks then immediately unlocks, the only way the lock the car is to go round to the passenger side and lock it by putting the key in then turn, then you can press the the fob and double lock the car. You cannot do this from the drivers side for some reason. Any help would be greatly appreciated. Many thanks, :P
  3. sticking throttle

    Hello, I have just joined and have a question I hope someone can help me with. My fiesta 1.8td flight 51 plate has a problem with the throttle, it starts normally then aftera few minutes normal driving the revs get higher and stay there until I reset the ignition by quickly flicking the key off and on without turning the engine off. After the few minutes I have to repeat this procedure. Any help would be greatly appreciated. Thanks :P