AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About Richiemac

Contact Methods

  • First Name

Profile Information

  • Gender*
  • Ford Model
    Kuga 2016 2.0 TDCI 180 + S max 2011
  • Ford Year
  • UK/Ireland Location
  • Annual Mileage
    5001 to 10,000

Previous Fields

  • Location

Recent Profile Visitors

3,840 profile views
  1. Try running the unlock again....
  2. Should work without cluster change. Did you put some music on another sd and see if it is seen......just in case there's a wiring issue ? Dodgy or faulty card usually gives a faulty sd card warning on screen.
  3. Can do it via Teamviewer for you if you need......up to you. R.
  4. Done lots the licence way ( €80 via PayPal )....homemade SD works perfectly. It MUST be a class 10 or higher SD card or it won't work. Irony is that most of them I have done were for a local Ford dealer :) For them I use genuine cards. R.
  5. This one is fine..... The patch circumvents the need for a licence file. I' ve done 1 this way and it works. If you want to get the proper licence file go to .....chip ford.russia R.
  6. Easy to do . Put the navipatch file on a blank USB. Insert and run the unlock. Using Forscan with extended licence and Elm cable just edit the APIM configuration to turn nav on. Restart sync. Buy or make your own F5 nav sd card. Done. There's another way which involves buying a licence file and installing. Forscan part has to be done either way. R
  7. Looky here......:)
  8. how can i add sat nav to my focus as you stated it can be done i have one on a 66 plate titanium

    Many thanks

  9. Hello Ritchie, I've just bought a Focus Titanium and didn't twig it didn't have sat have and the wife isn't best pleased! I would be really grateful if you could tell me how I could get it put on to the sync 2 system, however I am really not very technical? Also would it invalid the remaining warranty if dealer finds out? Help!

    1. Richiemac


      Send you some info in a bit....driving at the moment.




    2. geordie76


      Many thanks Ritchie, please only reply when it's convenient for you mate

  10. Just buy the factory loom and pull it through (50 quid ish ).....did it a couple of years back on a 2008 focus. Check first if the BCM has the pin outs to support auto lights and wipers ......mine didn't i recall so i had to change it also. Made a back up of the original configuration with ELMconfig program, fitted loom, auto light switch and rain /light sensor , then wrote original config to new BCM and then modified it to include rain sensor and auto lights. Worked perfectly.
  11. You have Sync 2 with 8" touchscreen ?
  12. Nav can be added to Sync 2 with 8" screen. Done it. Several times :)
  13. Should be just fit the steering wheel and activate cc in BCM module.Can be done easily yourself by modified Elm interface...... ☺
  14. The audio outputs of your module are different to 7S7T 19G488 - AE......think that's your problem.