AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


saabu

Budding Enthusiast
  • Content count

    3
  • Joined

  • Last visited

About saabu

  • Rank
    Newbie

Contact Methods

  • First Name
    Sid

Profile Information

  • Gender*
    Male
  • Ford Model
    Mondeo
  • Ford Year
    2002
  • UK/Ireland Location
    Essex
  • Annual Mileage
    5001 to 10,000
  1. Thanks again. Sid
  2. Thanks for your prompt reply. I shall have a look under the wing on the offside, as you suggested and see if there is a grommit. Feel a bit hesitant to drill a hole into the chassis though. I presume that I would not need to remove the bumper to do this job. Regards, Sid
  3. Dear friends, I would appreciate your input regarding the following two queries I have. My car is a Ford Mondeo 2002 LX Auto. I have decided to install some rear sensors to help with parking. These need to be drilled into the bumper. I have already bought the item. My queries are as follows: 1. How do I feed the wire from the sensor [4 in number] into the boot. I cannot see any obvious openings in the chassis through which I can feed the wires through. 2. How do I identify which is the wire for the reverse light on the light module [needed to fix the wire to sensor box to power up] Look forward to hearing from you and thanking you in anticipation of the same. Best regards