• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


morfej

Budding Enthusiast
  • Content count

    2
  • Joined

  • Last visited

About morfej

  • Rank
    Newbie

Contact Methods

  • First Name
    morfej

Profile Information

  • Gender*
    Male
  • Ford Model
    c-max
  • Ford Year
    2008
  • UK/Ireland Location
    Other/NonUK
  1. Could somebody share saved the RCM config file from ELM-FF2 and ELMCONFIG program.
  2. civil-zz: I've readed the thread and was happy to find the thread and the forum. My question is about MS-CAN network. Does anybody know if for example RCM (airbag) module could be connected on the table. I mean with that connecting ELM327 interface (CAN pins 6-14) to the RCM and applayin powersupply and ground. Like on attached picture. Tried with ELMconfig, and ELM-FF2 but it wasn't working. What get on my mind is that mybe the resistance of CAN network is ok when connecting like that. Anyone have idea how to connect thing(like RCM) on MS-CAN directly to ELM327? br
  3. Welcome to the Ford forums morfej :)