AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


zetec powered

New Member
  • Content count

    1
  • Joined

  • Last visited

About zetec powered

  • Rank
    Newbie
  • Birthday 04/02/1991

Profile Information

  • Gender* Male
  • Ford Model mk2 fiesta
  1. zetec conversion

    hi, you need to take the power steering out an air con this will give you a bit more power to.get a xr2 top engine mount and trim a bit of it .but the zetec block has 4 holes and the xr2 has only 3 but only two of the holes line up so you could get it made to fit but i just put it on like that and it is fine you could just use the gear box uv got. but i have just used a 1.3 escort box. then just put the engine up in the car and bolt up the mounts thats the engine in.then you need a xr2 radiator and u just have to cut and join the hoses to fit, xr2 alternator and bracket you can just change the pully to the zetec one on the alternator an get a belt for a mk3 fiesta zetec with no air con and power steering, you can use the zetec manifold or just get a performance one.then comes the hard bit the wireing rather then cut in to the xr2 loom you can use the loom for the xr2i you just have to do all the inside of the car coz it is diffrent it takes a wee bit of time but well worth it very fast car