AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Hobz

Budding Enthusiast
  • Content count

    2
  • Joined

  • Last visited

About Hobz

  • Rank
    Newbie

Profile Information

  • Ford Model
    Mondeo
  1. Hi I`ve just tried to have my wheels all alligned but the guy in the garage said he couldn`t do one of the rears as the bush used to make the adjustment has siezed. he said I need to replace the whole arm as the bush isn`t supplied on its own. I`ve had a look myself and the cam bolt dosn`t rotate as it should instead when you try to turn it the whole bush tries to rotate, which it can`t cos it fixed to the arm. The new arm is £30 but in order to fit it I`ll have to remove the cam bolt which I can`t cos it`s siezed! I`ve seen elsewhere that people have had to angle grind the bolt off :( don`t fancy trying that although I do have a small grinder. I`ve tried penetrating oil to free up the bolt but no luck so far. Any ideas how to free the bolt to allow adjustment? or How to easily remove the bolt / arm to allow a replacement? PS its a 04 Reg Mondeo 2.0 TDi if that helps.
  2. Hi I have a 2004 reg Mondeo 2.0 TDi which has developed a judder which I can feel both when cruising along the motorway (50+ mph) and also when braking (any speed). At first I changed the front brake pads which reduced the severity of the issue considerably but didn`t completely solve it. Next the rear pads got changed, slight judder still there. Finally I`ve had the wheels rebalanced but still the judder is there. Some other info: I didn`t change the pads cos thay all looked nearly new. All the wheels and tyres are brand new. I bought new alloys after the orginal ones corroded leading to rim leaks and constant slow punctures :( The car has another issue of pulling to the left but I know that is down to a misalligned rear toe adjustment arm (see my other post). I did ask Quik Fit to rebalance all the wheels but I`m fairly sure they only did the fronts. I`m quite happy to tackle any task on the car, have built kit car in the past and have a garage full of tools :) So avoiding high garage costs would be nice but if it needs specialist tools then I`ll have to fork out :( Some Questions: If its not the pads or the wheels, what else could it be? How do I check "washout" on the new pads and how do you adjust it? Any other thoughts / ideas? Any help much appreciated.