Ford Owners Club - Ford Forums Messages
Ford Fair 2016: Tickets and stand passes are now available to purchase. More info here.
Review your Ford: Help others when it comes to buying a car like yours and review your Ford now
AdBlock WarningParts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.
Thanks a lot. my dad is an electrician, he will have that equipment. If there is no reading, is there a way for me to by-pass the old wiring and put new wiring in, going to the control panel and the HCV.There are loads of wires going into the control panel, which two would it be? Thanks for replying :-)
Hi, I bought my 2000 reg ford fiesta 4 days ago now. The heaters are stuck on hot. I have replaced the heating control valve and i got a replacement control panel thats in the car, that you use to control the heating system. I replaced them both today and i still have the same problem. I have also cleaned the contacts up on the plugs, incase anything had got inside them. i dont have air conditioning. Its a simple hot/cold system Also the previous owner had decided to cut the wire to the heater control valve (hcv) and connect the power source up to the battery, this made the blowers cold ( i assume they did this so they didnt bake). I had taken it to my mechanic and he said it may have caused a fire as the hcv would of had two much power going to it. He connected back up to the original wires, and this made the blowers blow hot. He said either part would need replacing so i replaced both. those being the hcv and the control pannel. PLEASE HELP :-(