AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About clubber

  • Rank
    Feet Under The Table
  • Birthday June 15

Profile Information

  • Gender*
  • Ford Model
  • Ford Year
  • UK/Ireland Location
  • Interests
    Motorsport & Racing
    Car Modification
    Food & Drink
    Computers & Electronics
    Sports & Leisure
  1. MK3 13 reg auto locking not working

    Sorted guys and gals.Wrote to BCM and it now works
  2. Hi all, I have a MK3 13 reg Focus Titanium. I just tried to enable auto locking by speed using FoCCCus 0.8.6 I read from IPC, changed setting #32 to Automatic Locking and wrote it back to IPC I went for a drive but the car does not auto lock. Any help appreciated
  3. Is cruise control working on the 2.5l ST/RS engine yet?
  4. Anyone Retrofitted Power Fold Mirrors?

    Check the wires, one of the connections has 2 wires going into it.
  5. We've bought one over at There is a thread where you can pay and get auto power folds for £15
  6. Anyone Retrofitted Power Fold Mirrors?

    Plugs connect into the module
  7. I thought about doing that but didn't try it in the end. I will try it when I get a chance. I'm at the stage where I'll try anything lol
  8. Correct, ST/RS did not have factory cruise control, nor was it an option. Maybe you are right, PCM may not support cruise. I don't know anyone that has cruise control on their ST. I am not giving up yet.
  9. When I press '+' the light still doesn't go on. I have tried at 50mph. Cruise is enabled in GEM, HEC and PCM. I have all the pedal switches and wires.
  10. When I read VID-block, integrated speed control is ticked. I will try again with pressing 'on' after engine start. I have a light on my dash for cruise control (I checked it with led test 'trick'). The light does not light up when pressing the 'on' button.
  11. Ford buttons mate, I have a 4 spoke steering wheel.
  12. This is doing my head in. The car can "see" the buttons as I have tested them with the rear heater switch "trick" I have all the wiring and switches present. I have activated cruise in GEM, HEC and PCM with ELMConfig 0.2.11c Could there be a fuse or relay that I need? Or is it only possible to do this in IDS?
  13. The software number on my PCM is 10/10/2007 Under firmware number it says N/A Would a PCM update help?