NicklasCc

Budding Enthusiast
  • Content count

    18
  • Joined

  • Last visited

About NicklasCc

  • Rank
    Member
  • Birthday 02/24/1993

Contact Methods

  • First Name
    Nicklas

Profile Information

  • Gender*
    Male
  • Ford Model
    Ford Fiesta
  • Ford Year
    2009
  • UK/Ireland Location
    Other/NonUK
  • Annual Mileage
    5001 to 10,000
  • Interests
    Car Modification
  1. Happy Birthday NicklasCc!

  2. Fiesta mk7 steering wheel audio switch control 1756753 http://www.ebay.co.uk/itm/Fiesta-mk7-steering-wheel-audio-switch-control-1756753-/190835615998?pt=UK_In_Car_Technology&hash=item2c6eb068fe
  3. What about this site? Any good? http://www.caraccessoriesplus.co.uk/product/ford-fiesta-wind-deflectors.html
  4. This is the big loom Bluetooth-loom connector (back) (bigger picture http://i46.tinypic.com/1zyabzb.jpg) Side Front Thegame1512:
  5. There are 3 torx20/25 screws you need to undo on the back of the steering wheel. Theese 3 screws holds the plastic "V" When they are out, you simply pull it off.. It can be a litte tricky, but it's doable.. :) After this, it's pretty straight forward. :) Edit: You will also need to dismount your airbag .. The battery must be out for 10-20 min before you start working on it...
  6. Mine did the same when i bought my car. Source an aftermarket button from ebay or a breakers yard and change it. Its a simple job! :)
  7. The connector my finger is touching is the connector from the bluetooth loom.. The one you want to have is the the one it clips into. :) If you have this one, it should be ready to hooked up! I'll post some pictures of the exact one when i'm home again on sunday. I am 90% sure that I have a big/deluxe screen at home.. I also have a 9-button "control panel" They are both for sale if you're interested :)
  8. There are many ways to do it.. This is just how the dealer did the job.. :)
  9. The gearknob is coated. Not that easy to scratch. I haven't installed it myself but it's connected to the fusebox in the buttom right corner as shown on the picture. The wire has its own 1amp fuse. When installing it you simply just dismount the plactic by the footwell aswell as the plastic connected to the gearknob. If you want more space you can dismount the glovebox. The wire simply runs behind this plastic trim. As far as i know, this wire comes in the box.. I hope this was helpfull..
  10. The free connector should sit in the "slot" here and get connected to the bt-loom.
  11. I installed the big loom without knowing that the models were diferent.. It was first afterwards I noticed that there was a diference in the models.. DUMB AS I AM! So the work was pretty much wasted and i installed the old loom again. thegame1512: I'll take some pictures when i get home again of the big loom and post them here this is where it should be located, under the radio... connecting the bluetooth loom how do you upload a picture in this forum??
  12. It looks great! I have one in mine, pretty easy to hook up as well .
  13. This is the right model loom that i have for the 2010-2011-2012 models The only problem is that the bt-loom has to go into the Big loom and not just the radio loom which the pre 2010 models do..... But yes, if you can make an adaptor of some kind... I dont think you can buy one from Ford.. :-)
  14. The loom i have has the same connection as neps' but i also have the BIG loom that connects the whole front, from a 2010 model which the Bluetooth loom goes into., Its a bit more dificult to change, but it IS possible with a free weekend :) it took me about 8-10 hours to change it, i dont know what you do for a living, but if you're a mechanic you can probaly do it much faster! All you really need is just to track where each of the connectors go to and remember to plug them ALL in (i forgot to connect the light switch which resulted a no starting car).. But as long as you keep track and plug all the connectors in.......... Its easy peasy.... ;) I took mine out again because it didnt fit my computer in the car, so now its just in storage and for sale :)