• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


phil child

Members via FB
  • Content count

    2
  • Joined

  • Last visited

About phil child

  • Rank
    Newbie

Profile Information

  • Gender*
    Male
  • Ford Model
    ford focus
  • Ford Year
    2008
  • UK/Ireland Location
    Shropshire
  • Interests
    Classic Cars
    Car Modification
    Travel

Previous Fields

  • Location
    telford
  1. to get my main bean to light up the road ahead, my dipped beam lights up about 10 feet in front, when there adjust right for the dipped, the main is to high, is there any way of adjusting them separately?
  2. Ford focus bonnet locks, don’t pay out, If your turning the key and the bonnet will not open, In side there is a plastic male and female cross that needs to fit into each other for them to turn, on the male there are two tags that spread and prevent this from happening 1, get a long screwdriver, place it through the grill so its pressing in to the black rubber garter where the lock rod enters the lock, press the screwdriver in as you turn the key. The bonnet should open, 2, Remove the plastic top cowling and the grill front, key barrel there are two little tags that need pressing to release barrel 3, remove the lock by undoing the two bolts that secure it, don’t need to remove any alarm wires, on the back of the lock you will see the male plastic cross, 4 cut of the two tags from the male plastic cross. 5, reassemble iv done two where bonnet was locked and two I did before the bonnet failed time 15min, cost £0
  3. Welcome to the Ford forums phil child :)