AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Randallsfocus

Budding Enthusiast
  • Content count

    85
  • Joined

  • Last visited

About Randallsfocus

  • Rank
    Settling In Well
  • Birthday 01/13/1983

Contact Methods

  • First Name
    Stuart

Profile Information

  • Gender*
    Male
  • Ford Model
    Focus mk2.5, Escort xr3i cabriolet
  • Ford Year
    2009
  • UK/Ireland Location
    Kent
  • Annual Mileage
    0 to 5000
  1. Hi, that sounds good the only thing concerning me is superchips/bluefin dealer has to "unlock" the ecu first. Wasn't sure if that's common on these newer fords?
  2. Hi sorry to take over this topic. I have a 64 plate c max 1.6 tdci. I want to get it "bluefined" as I have got the unit from a previous ford tdci. Has anyone else used bluefin on their cmax? Stuart
  3. Hi it backed up in iTunes but will not let me put the app onto phone
  4. Hi, unfortunately I don't have the old phone, the shop backed up and restored my back up to the new phone for me. I thought it was strange that it's not even on the App Store either
  5. Hi thanks for the advise, unfortunately there was no link or anything when i selected use mobile version.
  6. Hi does anyone know how I can get the owners club app back for my iPhone? Since I changed my phone I can't seem to find it on the App Store or anywhere? Many thanks. Stuart
  7. Hi after a bit of advice, I have a set of heko wind deflectors front and rear. The rear set keep coming loose as they only have one metal clip and double sided tape at the other end. Does anyone have the same set as these And had to use better tape? Or any other help? Many thanks Sent from my iPhone using Ford OC
  8. Hi, not really any update due to removing the plate to try and find a exhaust gas leak. Which turned out to be leaking around the turbo- to-cat join. Sent from my iPhone using Ford OC
  9. Hi, does anyone know if the metal gasket between EGR valve and EGR cooler has to be fitted a certain way round? It's on a 2.0 tdci. The gasket has a ridge outwards on one side and inwards on the other, but both EGR and EGR cooler are flat. Any ideas? Many thanks Sent from my iPhone using Ford OC
  10. I'm not sure on the layout of the 1.6 tdci system. In the Ford Focus guides section Lenny has done a detailed guide on fitting a EGR blanking plate on the 1.6 engine Sent from my iPhone using Ford OC
  11. Hopefully I'll get to try it this weekend Sent from my iPhone using Ford OC
  12. Hi, does this help? Number 5 where it bolts to exhaust manifold Sent from my iPhone using Ford OC
  13. Mines fine whilst accelerating, it's when your cruising at a set speed. Sent from my iPhone using Ford OC
  14. Hi I've never removed the EGR to clean it. The main reasons I want to blank it is, to stop black sooty crap being pumped back into the engine, secondly I'm hoping it might help cure "rough running" at about 1800rpm. It happens at any speed but Pacifically at 1800rpm. Any other suggestions to was could cause this? Sent from my iPhone using Ford OC
  15. Hi happy new year to you all. Sorry to bring up an old thread. Has anyone blanked off there EGR valve on a 2.0 tdci where the cooler bolts to the exhaust manifold? Most pics show after the EGR but I'm looking to Blank mine without the eml light coming on. Many thanks Sent from my iPhone using Ford OC