• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


SteveyLa

Budding Enthusiast
  • Content count

    5
  • Joined

  • Last visited

About SteveyLa

  • Rank
    Newbie

Profile Information

  • Ford Model
    Fiesta 6.5
  • UK/Ireland Location
    Lancashire
  1. Hi Dan. No luck I'm afraid, the 6.5 clusters are definitely not twist lock for the reverse lamps. Still looking for a way to get into them
  2. OK mate, I'll give it another go. Thanks for your help ! Regards, Steve K
  3. Daniel, thanks for your reply. When I released the clusters, only the indicator and brake lamps were twist lock, and therefore accessible from the "inside". It looks to me like the reversing bulbs are accessed from the "outside" of the unit, and that there is a clip out unit within the coloured lens section. I wanted to see if anybody else had removed these at all and if so, how easy it was ? Thanks again for your reply. Steve K
  4. Would anybody be kind enough to help me out with this bulb change. I have released the rear light clusters but the reversing bulbs are not the push fit or twist lock fittings. I can't see how to access the bulbs, would be grateful for any assistance. Thanks, Steve K
  5. Welcome to the Ford forums SteveyLa :)

    1. SteveyLa

      SteveyLa

      Thanks very much for the welcome :)