• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


smangle

Members via FB
  • Content count

    2
  • Joined

  • Last visited

About smangle

  • Rank
    Newbie

Profile Information

  • Ford Model
    ka2
  • UK/Ireland Location
    London
  1. Please Help Ford Ka Indicator Issue

    hello mate all of the bulbs flash as they should just a lot faster than the left side but they work as normal if i put the hazards on i am not getting any of the symptoms most people get with the disco in the back lights i am considering just rewireing the right side indicators. its getting that annoying cheers smangle
  2. heya all brought this x plate ka2 it runs lovely but when i indicate right the indicators flash at double speed i have replaced all the bulbs, the relay and the indicator stalk but still have the same issue i found the 3 earth points on the back of the car removed and cleaned them and done them up nice and tight anybody know of a common fault on these cars because i am at a total loss as to what is causeing it any help would be pukka . cheers smangle. p.s just to confirm the lights work as they should with the hazards on just not indicating right i have also noticed that the plastic protector on the back of the headlight is missing and the light fittings for main beam and dip beam are quite rusty would this be the cause of the problem or are they on a differant circuit. again any help would be wicked cheers
  3. Welcome to the Ford forums smangle :)