Subterranean

Budding Enthusiast
  • Content count

    2
  • Joined

  • Last visited

About Subterranean

  • Rank
    Newbie

Contact Methods

  • First Name
    Adam

Profile Information

  • Ford Model
    Fusion 2
  • Ford Year
    2005
  • UK/Ireland Location
    Cumbria
  • Annual Mileage
    0 to 5000
  1. Thanks for the help. I already had a fascia and cable adapter kit, but didn't realize the piece of plastic was for the rear of the stereo, makes sense now. I bought a cage this afternoon and think I have everything fitted and working. One question though, is the cage supposed to be fixed to the hole in the dash/the new fascia in some way? as I have it, it can't be pushed into the dashboard (because of the rear bracket and the cage overlapping the new fascia at the front), but it can be fairly easily pulled out towards you. Is this normal?
  2. Hi all, I'm a relatively new owner of a fusion 2 05 plate, and was looking to replace the stock stereo for an aftermarket one. I've never done this before but I reckon thanks to the guides I've found on this forum, I'm now 80% of the way there. I have the fascia, cable adapters and can cut off the horizontal bars from dashboard fascia (as in this post here). All I'm left with, and I think its more of a general car stereo fitting question rather than specific to a ford, is how to actually secure the stereo in place. After looking around, I think my stereo is missing a 'cage' and so doesn't sit properly within the new fascia. From this photo in the post I linked to above, I dont have the plastic surround for the front of the head unit that sticks out from the dash a little way. It looks like that would stop it from being pushed pack, but let you pull it forward. Is there anything else that would secure it from behind? If it is just a cage+plastic surround I'm missing, would this one do the trick? I'm trying to do it as cheaply as possible. Thanks for any help!
  3. Welcome to the Ford forums Subterranean :)