• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


andy1r

Budding Enthusiast
  • Content count

    4
  • Joined

  • Last visited

Everything posted by andy1r

  1. Fitted new ARB's today, had to cut splits in them with stanley knife. Quite an easy job.... but....they don't seem to fit properly. There is no play in them and no knocking noise any more. But on tightening the ARB clamps up, the split, which I had to cut in the poly bushes, doesn't fully close up as the original ford ones did. There is a gap of 2-3 mm. Does anyone know if this would fail MOT? I am thinking I should have gone for cheaper genuine ford parts and saved myself some time and money. Cheers.
  2. Hi, hoping someone here with some experience may be able to advise. I'm going to fit new rear ARB to my Mondeo H/B Mk3. I have use of a pit. Can I fit them from the pit with all weight on wheels, or do I need to jack the car up? Thanks in advance.
  3. Anti Rollbar Bushes

    Thanks for reply Peter. I don't think i was very clear in my original post. What I mean is, do i need to remove the tension from the wheels, suspension and anti rollbar by jacking the car up? I can access the ARB's without jacking it up. But having said that i now believe i may have to jack the car up because looking at the new bushes there is no split in them(polyurethane bushes). So I think I will have to slide them down the anti roll bar from the end. I was hoping that they would (if they had a split in them) just push on.