Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About A.Kipps

  • Rank

Contact Methods

  • First Name

Profile Information

  • Ford Model
  • Ford Year
  • UK/Ireland Location
  • Annual Mileage
    0 to 5000
  1. Here are the pictures!
  2. Fiesta 1.25 The seat still functions when I pull the wire perfectly, it's just the handle that has snapped. Could I send you an email, with the pictures I took on it? Unless there's a way to upload them onto this post? Thanks
  3. Thanks guys for all your help! I've found a car that has the part in a scrap yard, other than a hack saw would I need anything else to tear it out? Lol I might just consider 4 doors next time Dan! I take it as just the lever snapped I wouldn't need a cable or anything? What an effort for just a bit of plastic ay!
  4. Will do, thanks anyway mate
  5. Thanks Fiesta 1.25, I will try some more local dealers, but haven't had any luck with the ones I've rung so far. DanGersFord, I will try filling out that form, regarding the ebay part you sent me, it is not the exact replacement but do you think it would fit mine? I've added some picture of mine I've got some photos of my part, but can't upload them so if you could give me your email address or some other way of sending them to you to look at I would greatly appreciate it! Thanks a lot
  6. Hi there Basically the lever to pul to lower the seat to let others into the back has snapped on my passenger seat. I've got a 2001 3dr ford fiesta (mk 5) and i've searched everywhere and they only sell replacements for mk6 models. What can I do? Would a mk 6 lever fit in my ford (or could it be fitted)? http://compare.ebay.co.uk/like/170772092295?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&_lwgsi=y&cbt=y&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=63Or (I doubt) Or does anyone know where I could pick up a mk 5 lever? Thanks very much A.Kipps
  7. Hi there I've recently purchased a 2001 Mark 5 Ford Fiesta Fun (1.3) and the key seems to jam when used on the drivers door. I took the car to the mechanic and he said to try and get a new key cut as that would most likely be the fix and then get it programmed which will cost about £40! Is that information correct, why would it be the key if it only didn't work in one lock barrel and why would it need programming if it is a simple mechanical key? Any advice would be greatly appreciated! Thanks a lot
  8. Welcome to the Ford forums A.Kipps :)

    1. A.Kipps


      Thanks Steve