• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


Nightshot72

Members via FB
  • Content count

    7
  • Joined

  • Last visited

About Nightshot72

  • Rank
    Newbie

Contact Methods

  • First Name
    Gavin

Profile Information

  • Ford Model
    Focus 2.0 tdci
  • Ford Year
    2009
  • UK/Ireland Location
    Tyne & Wear
  1. Possible Dpf Problems

    Thanks for the reply, gonna have to do some digging or contact them to see if they will do it any cheaper, I forget the name of the place now, think it was Durham diesels or something like that.
  2. Possible Dpf Problems

    Gonna get mine removed too, 85k on a 09 plate, few problems like limp mode, stalling etc, so I think this will be the best option. £450 for dpf removal, egr blanked and ecu remap. Does this sound about the right price?
  3. Cheap Genuine Heated Ford Mist Jets

    Same here, cancelled, was looking forward to getting these.
  4. Heater Control Wire Loose

    No replies :( Guess Ill have to take a trip to the local stealer. I think the cable must have snagged somehow as it seems to have a kink in it.
  5. Excessive Wind Noise

    Got the same problem on the rear passenger door, where would be the best place to get this rubber tubing to put in the seal?
  6. Heater Control Wire Loose

    Hi there, Im a newbie on here but was just wondering if anyone could help me out a little. Yesterday I went to turn the heater control from cold to hot and it felt very stiff, I wiggled it about a bit and then it became very loose and only cold air coming out no matter what position the control is in. So I did a bit of investigating and took the stereo and glove box out and found the wire on the back of the control is loose but still attached, I was trying to trace the wire back to the matrix but couldn't see where it actually went to without having to rip the dash out, which Im not keen on doing. Can anyone point me in the right direction as to what has gone wrong here? Many thanks Gav. 2009 mk2.5 2.0tdci
  7. Welcome to the Ford forums Nightshot72 :)