D13 HPD 95

FOC Supporters
  • Content count

  • Joined

  • Last visited

1 Follower

About D13 HPD 95

  • Rank
    Ford Enthusiast
  • Birthday 04/13/1995

Contact Methods

  • First Name

Profile Information

  • Gender*
  • Ford Model
    Focus ST-2
  • Ford Year
  • UK/Ireland Location
  • Annual Mileage
    15,001 to 20,000

Previous Fields

  • Location

Recent Profile Visitors

5,505 profile views
  1. It's one of those things that's been tested time and time again tbh, they work to a degree I use either shell v power or Tesco 99 momentum fuel both 99Ron rating and with additives in already, so the extra stuff I use is purely to make sure the fuel is 99+ will it effect the power no, not unless your car is custom mapped on say 101 rom fuel, my map is only 97ron so 99ron fuel ain't going to add 20bhp and neither is this additive what it is going to do is clean the fuel tank line filters injectors manifold valves block pistons etc so it's a cleaner burn less carbon build up means less power lost and a healthier engine :) the only other noticeable thing they do do, is reduce the amount of ignition timing the ecu cuts and less knock on the pistons the ecoboost engines suffer from the ecu pulling timing out a lot when it detects any knocking going on
  2. The dials are dead easy to do, once the units have been removed a small flat head pops all the clips off then using a wide fork prise the needles off the backgrounds are changed just push into place then plug the units back in still in bits and no needles fitted go into the test menu and do a dial sweep which goes bottom range top range and then they set to zero takes 2 seconds then put each needle back on at the zero position carful not to move the motor units redo the dial sweep test make sure they are in correct position unplug units rebuild them and fit back into car job done :) and well insurance little things changing the dials and new forge valve, brake deflectors I haven't told them as they already either know about that part being modified or it's such a small mod it's not worth the admin fee, like changing headlight lamps I knew a guy who tells them about that and it's like really to me that's maintenance, when I change something big that changes the cars handling or power output they will be notified and I try to do it one go so I don't have to constantly pay £25 admin fees haha
  3. One forge valve fitted had to replace stock hose looked shocking
  4. Dials are from a company called gauge face uk, so easy to change them over toke an hour to do, and yes going to get very busy soon :) first job starts today need to change my recirc valve after getting some sleep, night shifts suck, also wish I was at Ford fair this year but hey ho next year will soon come
  5. Not update this in a while so here's what's been happening ;) So I've bought the following parts and awaiting delivery of: SS tuning gear knob, custom one off steering wheel cruise control parts for retro fit rear brake upgrade to 300mm discs boomba racing oil catch can stage 2 new shift shifter oil sump baffle and balance shaft delete I have to fit the following: dash cam forge updated recirc valve new engine bay plastic maxton rear diffusor new sump plug magnetic type I have done in the past month: new engine bay bolts new number plates in a holder got a new mascot for the car ;) after watching cars had the rear lights tinted fitted new dial back plates fitted RS brake cooling deflectors and adapted the wheel arches and now testing a new fuel addictive tried to do a full deep clean but after polishing the car rain had hit bad :/ and with work tonight I'll have to leave it at that and do the rest when I can I have planned in the next month or two the following work first at pumaspeed new brake fluid, rear brakes fitted, braided lines, sump baffle and BSD, oil catch can, coolant changed, oil change, oil and fuel filters changed also hybrid turbo is booked in so fitting mapping etc going to run stock actuator to restrict boost to save the piston rings for now and make them last future plans are as follows: SJ conversion headlights forged engine parts new exhaust tips New arbs and camber arms new alloys and tyres again lol rs brembos on the front cobb accessport new nav card dislock coolant and anx hose upgrade new speakers all round boomb accessories for engine bay front grill cut out to full honeycomb piper cams and new springs bigger injectors water meh injection summit racing braces all round Mountune breather plate probs missed more off but will update when I can and have done bits :)
  6. Well I said no mods for a while but had a spare hour or so finally refitted my Steeda oil catch can and my summit racing strut brace
  7. No more mods as such to talk about but got some new cleaning products from Jayswax and after 5 hours some pretty good results I think :)
  8. ill try and do one when i can heres the link to them https://ceuk.myshopify.com/collections/rgb-halos/products/rgb-halos-bluetooth-controlled
  9. well need to fit the oil catch can again, front top strut, a deep clean next week. then come payday there may be a few things in the post ;) have to keep an eye out
  10. not at all, remove the fog light bezzels, fit into place with tape route the wiring and secure into place plug all together and insulate the connectors and connect to the battery, if you walk away from them and go out of Bluetooth range they turn off and turn off after locking the car if you wait 10mins, plus you can still be connected to the radio play music and control the colour from the app controlling them :)
  11. Some night time photos of the halos
  12. I got them from Ali express I'll try and find a link for you, and I'm pretty sure they would the latches seem a pretty common size if I'm honest, yh I'll email them and see what they say hopefully get some nice clear photos fitted, I'm not to sure about the spoiler haha talked about going hybrid turbo and she wasn't bothered showed her the BTCC spoiler after talking about turbos and she went mental haha something about she ain't being seen in Sainsbury's doing the shop with that on it 😂 Haha done a few more hits today, pro alloy charge pipe kit installed omg what a faffffff to get on and getting it to sit in the right place nearly gave up if it wasn't for the fact I wouldn't have any pipes connecting the turbo to anywhere 😂 Didn't get many photos of that install tho, just a change from 53mm pipe to 67mm all the way through no restrictions plenty of more cooler air to play with ;) and installed my halos from CEUK brilliant kit highly recommend them!! Off on They are really bright in daylight, photo doesn't show it but I'll get one at night later to really show them off ;) needs a clean which will be Tuesday job, then a full detail on Friday as she's being used as a Prom travel car :) waiting for a silicon reducer to install my oil catch can from Steeda that I had to take off due to the pipes supplied calasoped under pressure -.- and also a strut brace while I have all the panels off :) busy day Tuesday should be ;) also a little info after installing the boost solenoid valve the revs holds really well, the boost is smooth and lot quicker, changing gear and letting off the throttle creates a loverly turbo flutter and still pulls as hard as ever, straight to 3/4 on the bar dial and holds there through all gears doesn't drop one bit love it!!
  13. Well got home early from work today so... this little lot happened 😎 Latch covers from China CP gels Paint Modz header tank cover!! New boost solenoid valve, if I can get a video tomorrow I will sounds insane Some little CP logos on the mudflaps front went on square and rears are at an angle so you can see them Instagram this logo #D13 HPD gel New left old right big difference Both new lights #next level This is how she's left for tonight until more time spent on here tomorrow!! God she needs a clean
  14. I do like the BTCC look but when I showed the other half the rear spoiler you can get which is a copy of the BTCC one she said are you hell as like getting that, so she's normally not ever bothered about what I do to the cars but she put her foot down on that one 😂 For now 😜😉
  15. I picked the car up Tuesday night and then got it home and had to drive up north for a training course with work so only grab the photos I have above, I'm home tomorrow and hopefully if the sun is shining or at least not raining I'll be playing with some new bits and will get plenty of photos :) and it's with the 3M tape mate plenty strong enough! And cheers for the feedback on the lights, just want them to be nice and black and glossy the top ones just don't look glossy if you get me? I'll ask the seller and see if he has more photos :)