AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Budding Enthusiast
  • Content count

  • Joined

  • Last visited

About Tezza

  • Rank
    Feet Under The Table

Contact Methods

  • First Name

Profile Information

  • Gender*
  • Ford Model
    Focus ST3 Mk3
  • Ford Year
  • UK/Ireland Location
  • Annual Mileage
    0 to 5000

Recent Profile Visitors

6,502 profile views
  1. I'm in the middle of helping out a friend in fitting this feature but have now hit a snag :( (things we had to change) Door looms Door modules Floor loom This is being done to a 3dr 2008 FL Focus ST Everything went together fine was just as simple unplug and removing the looms and fitting the correct one's The snag is that now the ignition via the start button does not work so it must be down to the configuration of the body control module that needs configuring so we need to look into getting feed from the power hold relay to enable us to connect the elm via the obd port as with no ignition mean no access to obd port
  2. Simon The reason your having trouble finding the part is that it comes with whole the trim ask your ford dealer for a 1840393 here in the uk the cost is £6.67 Hope this helps
  3. Green connector is for the reverse camera
  4. Me too if its still current
  5. FoCCCus does not have direct configuration in ts programme as you need to change the Block the Config DE00 - DE00 to enable the APIM
  6. Yes I did and you will also need to buy the full programme licence to activate the camera as FoCCCus program does not have the second part that needs enabling :( As above Terry
  7. Looks great which camera did you go for ? and how long did it take the Russians to send out the adaptor :)
  8. Update I have successfully fitted a oem reverse camera to my workmates ST Mk3.5 TDCI :)
  9. I have the UCDS adaptor and programme and this covers alot of fords inc the 2015 focus :) Yes will keep you updated as fingers crossed it will be up and running tomorrow as we have fitted the camera and new loom just needs activating
  10. You will not have the input like on the pfl the set up on the fl with sync2 is totally different
  11. FoCCCus does not yet support the mk3.5 unless i have missed a update lol
  12. Have you check your screen to see if you have the white/cream input for the camera ?
  13. i would say just like mine you get the screen with the distance bars and the bleep's
  14. Yes came out the factory with them fitted :)
  15. Yes and all for under £75 :) would still like the oem set up as the park pilot also shows up when the camera is on but i still get the bleeps