• Announcements

    • Stoney871

      Posting in General Chat thread.   11/11/2017

      it has been noted that too many Members are posting messages in the General Chat area instead of the correct Forums. Any messages posted in the General Chat area that are not General Chat will be deleted without warning and offenders may recieve warning points if repeated instances are seen from that Member. There are plenty of different Club areas that encompass 99% of Ford related posts, please select and use the correct one. If anyone is not sure of which area to post something then feel free to P/M myself or other Senior Staff for guidance. The Moderating Staff are having to spend far too much time chasing this problem instead of maintaining the other areas of the forum.


ooda55

Budding Enthusiast
  • Content count

    5
  • Joined

  • Last visited

About ooda55

  • Rank
    Newbie

Contact Methods

  • First Name
    chris

Profile Information

  • Ford Model
    Fiesta
  • Ford Year
    2011
  • UK/Ireland Location
    Essex
  1. hah probing around at 12v wont cause you much harm, just make sure your meter isnt on amp mode or you will notice your test leads getting very hot very quickly and smoke pouring from your meter ;) Its worth noting there were two sockets for a fuse on my "fuse tap" One is a fuse for the circuit you are adding, and the other replaces the fuse in the fusebox. This allows you to take a tap from a circuit even if it is in use. You just have to make sure you install an appropriatley rated fuse for each circuit.
  2. I went with what looks to be number 22 in the manual. I simply probed around the empty sockets with a multimeter (ground connected to chassis) to find a +12v with the ignition off. Oddly in the manual #22 is listed as "cigar lighter, front power point".. Which you would think would already have a fuse in it seeing as my front cigar lighter works... Here are a few pics of the fusebox with the fuse tap installed, and where I mounted the socket: http://imgur.com/a/DMKdu
  3. Nice write up! I started this on my car (after promising myself i would not mod it :P) and installed the socket in roughly the same place. I had mounted it on the bottm facing part of that panel so it was hidden out of view. Those fuse taps are very neat! Just what I was looking for to make the electrical connection instead of ripping up the entire console to tap off the existing socket. I will put some pics up when the fuse tap comes and I can finish it off :) Chris
  4. My New Ford

    Hi again! Thanks for the nice replies guys, this seems to be a very friendly forum :) As for the car I am getting on well with it, lovley and comfortable to drive. I really do feel for these fiestas you get a great car for your money. I made a few silly mods to my old 99 fiesta as I am quite into my electronics. However I have promised myself not to ruin this one! Chris
  5. My New Ford

    Hi all, Picked up this bad boy last month, hope you all like it! Midnight grey is boss!