AdBlock WarningParts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.
To remove the drive shaft, complete with outer cv, from the hub do I just undo the hub nut? Will I need a new hub nut? Many thanks for your help - It seems like the Haynes manual was written for a different car sometimes!
I've been trying to work on my daughters 2004 Ford KA and fix a host of MOT fail problems. In doing so Ive damaged the boot on the drivers side outer cv joint. Oh hum I thought better replace it so I removed the old one and cleaned up the joint only to discover that there is no circlip - as described in Haynes manual. Ive tried inserting some circlip pliers but the joint is too small; I tried a safety pin and it only just fits. Is there a varient where there is no circlip - I don't know what to do :-( and she's coming home from holiday tomorrow. I really don't want to give in and go to ford as I might as well have paid their extortionate prices in the first place and saved myself the pain of 2 weeks lying on the garage floor! Ive attached a picture of the joint in case anyone can help