New Member
  • Content count

  • Joined

  • Last visited

About maris273

  • Rank

Contact Methods

  • First Name

Profile Information

  • Ford Model
    ford fiesta
  • Ford Year
  • UK/Ireland Location
  1. Hiya, Today i tried to install chip box for my fiesta.Everything you had on pictures were correct but there are easier way to do than you showed. Firstly remove the battery and unscrew the 3 screws after you removed the air box you can move your battery plastic box with ecu. You have a space and then you may put the chip box and you may put your hand to reach the plug to connect it. After that you may put everything back. If you remove air box you don't need to remove eco box it would be hard because the screws are the bottom which will make it difficult. P.S Some of the pictures you showed are hard and it takes loads of time than when i did mine. However there are correct bits which i did too.But there was a information that you could get from the bottom to get the plug and what i did was i removed the passengers wheel and there is a gap and you will see the commoner al plug but it is hard to reach it but you could try it might work for you. I am very happy with the chip box DRACKE BOX2 more power quick accelerate and save your fuel and VERY. It is true i tested myself i could not believe this. Thank you! Good luck