AdBlock WarningParts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.
Thanks chaps, all seems to have settled down now, but I will bleed the brakes as I have obviously pushed contaminated fluid backover riverside red Middlesbrough .
Thanks for both replies, I did have the cap off for both sides, the reserviour was overflowing so I just put the cap back on. heavy braking is fine, and in line, ( not veering of to either side.) I have been quoted £35.00 for brake flush. this would be still less than the dealer changing pads in correct fashion £90.00 so if it works I am still in pocket. however pressure flushing sounds may be an option.. I would say that 85% of my diy goes right (youtube ) mending tellies, wallpapering and computer problems, but my wife has a keen eye on this one, as its her car. MMMMMM
Hi, on a cost cutting excersize I youtubed pad change for a 2010 focus, followed all instructions, really worked well. but !! at low speed cornering the ABS seems to kick in. it appears that when I C clamped the piston back I should have opened the bleed valve, instead I forced it back up. Is this the cause of the problem. Would bleeding the system remedy the problem. Any advice appreciated. Mike. I need hope.